DIP298224CSBIL- -  -  N- Oblò rettangolare apribile 300 x 600 mm con corazza - Ischia -N- S- S- -07/04/2026- Prodotti per nautica diporto- - NN- N- Stefano Moscatelli- N-  - 1,057,545Stefano MoscatelliBbisProdotti per nautica diportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP298224CS- N-Sep 11, 20271057545
 
Form
  Prodotti per nautica diporto(TO)
Certification N. DIP298224CS - (BIL)
Certificate date 07/04/2026
Product Portellino di murata per unità da diporto

Model or Denomin.
Items
Oblò rettangolare apribile 300 x 600 mm con corazza - Ischia
Applicant
Directive NONE
Standards RINA rules for the Classification of Yachts
Expire date 11/09/2027
Responsible Office VIAREGGIO
CERTIFICATO DI OMOLOGAZIONE BIL
Vuoto Querysave
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATEN. DIP298224CS
Si certifica che il seguente prodotto soddisfa le prescrizioni delle norme RINA per l'omologazione di tipo.
This is to certify that the product identified below is in compliance with the applicable requirements of the RINA type approval system.

Descrizione Portellino di murata per unità da diporto
Description Side Scuttle for Pleasure Vessels
Tipo Oblò rettangolare apribile 300 x 600 mm con corazza - Ischia
Type
Norme di riferimento RINA rules for the Classification of Yachts
Reference standards RINA rules for the Classification of Yachts








_________________________________
RINA Services S.p.A.
  
Giuseppe TianoStefano Moscatelli
       
Rilasciato a VIAREGGIO il 7  Aprile  2026.  Questo Certificato è valido fino al 11 Settembre 2027
   
Issued in VIAREGGIO  on April 7, 2026. This Certificate is valid until September 11, 2027
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI OMOLOGAZIONE DI TIPO
TYPE APPROVAL CERTIFICATE
N. DIP298224CS
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
Oblò rettangolare apribile 300 x 600 mm con corazza - Ischia


Product description / Descrizione del prodotto.
Rectangular openable type sidescuttle: dim. 300 x 600 mm.
Portellino di murata rettangolare apribile: dim. 300 x 600 mm.

Reference documents / Documenti di riferimento.
Drawing approved with number DIP/129929.
Disegno approvato con numero DIP/129929.
Tests: technical reports filed with job RS/2024/CS/01/2982.
Prove: rapporto tecnico archiviato con pratica RS/2024/CS/01/2982.

General acceptance conditions / Condizioni di accettazione generali.
1) Shop test: an hydraulic test shall be carried out before despatch by means of batch test. For each batch at least two sidescuttles, within no. 10 sidescuttles produced, shall be tested.
1) Test presso il fabbricante: per ogni lotto deve essere effettuata una pressatura idrostatica prima della spedizione. Per ogni lotto di 10 portellini devono essere collaudati almeno due portellini di murata.
2) The sidescuttle will be supplied from the Manufacturer with installation manual.
2) il Fabbricante deve fornire il portellino di murata con il manuale di installazione.


Particular acceptance conditions / Condizioni di accettazione particolari.
3) The sidescuttle is suitable for installation on board of yachts having length between perpendicular (corresponding to full load waterline) < 50 m for motor yachts and < 40 m for sailing yachts.
3) Il portellino di murata è idoneo per installazione a bordo di unità aventi lunghezza fra le perpendicolari (corrispondente al galleggiamento di massimo carico) < 50 m per unità a motore e < 40 m per unità a vela.

4) It is to be verified that the pressures p1, p2 and p3, as calculated according to the rule's formulas, are less than 70 kN/m^2.
4) Deve essere verificato che le pressioni p1, p2 e p3, come calcolate mediante le formule regolamentari, siano inferiori a 70 kN/m^2.

5) The portlight is suitable for installation in the following zones (see the following figure): 1a, 1b, 2a and 2b.
5) Il portellino di murata è idoneo per installazione nelle seguenti zone (vedere la figura seguente): 1a, 1b, 2a e 2b.




VIAREGGIO 07 Aprile 2026 
VIAREGGIO April 07, 2026
**** NOTICE: This is NOT an official certificate ****