FAB001023XYENG- -  -  N- Slabs for normal and higher strength hull structural steels -N- S- S- -06/09/2023- Fabbricanti Approvati- - NN- N- - S-  - 1,191,114BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB001023XY- N-May 25, 20281191114
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB001023XY - (ENG)
Certificate date 06/09/2023
Type Approvazione di fabbricanti di materiali
Product Bramme in acciaio strutturale da scafo

Model or Denomin.
Items
Slabs for normal and higher strength hull structural steels
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 25/05/2028
Responsible Office RINA Ukraine Survey Station
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB001023XY
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Hull structural steel slabs
Type Slabs for normal and higher strength hull structural steels
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until May 25, 2028
_________________________________
RINA Services S.p.A.
Andriy Nikitenko
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB001023XY
Enclosure - Page 1 of 1
Slabs for normal and higher strength hull structural steels

APPROVAL CONDITIONS



Steel grades: A, B, D, E, AH32/36, DH32/36, EH32/36.

Dimensions of slabs: 150-250 x 1000-1500 x 4000-9500 mm.

Steelmaking: Basic oxygen process in tandem furnace with argon-oxygen mixture blowing, Open Hearth Furnace.

Casting method: Ingot Casting (The steel is cast into the moulds. The ingots are rolled into slabs at the slabbing Mill - 1150).

Deoxidation and grain refining practice: Normal Strength steels - Al; Higher Strength steels - Al.

Survey conditions: The products are to be in compliance in all respects with the relevant RINA Rules and are to be tested accordingly.

Products use conditions: Individual users of the slabs are to be approved for the specific grades of steel they are going to manufacture with the slabs.







General conditions of approval.
- The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respect.
- RINA is to be notified of any changes of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Ukraine Survey Station September 6, 2023
**** NOTICE: This is NOT an official certificate ****