ENGGS01/11/2009
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED118009SH/002
Certificate date 11/1/09
Type Mezzi di salvataggio
Directive 2002/75/EC
Product Dispositivi di messa a mare per imbarcazioni di salvataggio a caduta libera
Item Nº A.1/1.23
Model FA65
Identification FA65257
Intend For Hull No.MD30000LBC-02
Manufacturer JIANGYIN CITY BEIHAI LSA CO., LTD.
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Place of production 332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
Place of requester 332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code
Surveyor CHENG YIFENG
Head Office SHANGHAI



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED118009SH/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.23
Description Launching appliances for free-fall lifeboats
Model FA65
Identification FA65257
Intend For Hull No.MD30000LBC-02
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code
    
Issued at Genoa 
on November 1, 2009

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /09
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED118009SH/002
Manufacturer:
JIANGYIN CITY BEIHAI LSA CO., LTD.
Address
332 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA

Verified components of the equipment (with serial number)
FA65257
Intend For Hull No.MD30000LBC-02
Technical documentation
Test report issued by RINA on 28th July, 2009 ( n. FA65257) in accordance with Resolution MSC. 81(70) and MSC.48(66) LSA Code.

Drawing as followings:
 315SC-00                     65KN launching Appliance of Free-Fall lifeboat
 315SC-00                    Operation, repairing & Maintaining manual
 315SC-00JS      Calculation Instructure of Designing
 315SC-00DYL    Electric Program
 315SC-00YYL       Hydraulic Program
 315SC-01-0           Pivot Unit
 315SC-02-0                  Hydraulic winch
 315SC-02-1-0        Transmission Unit
 315SC-02-2            Base
 315SC-03-0           Pipe Arrangement
 315SC-05-0           Davit Arm
 315SC-05-1-0         Block       
 315SC-05-2-0         Connect Beam (1)       
 315SC-05-3-0         Connect Beam (2)
 315SC-06-2-0         Block       
 315SC-07-0           Middle cross Beam
 315SC-08-0           Ramp
 315SC-08-1/2/3/4-0     Connect Beam       
 315SC-09-0     Arm Support
 315SC-10-0     Release Hook Unit
 315SC-10-1-0     Gripping Chain
 315SC-10-2-0     Gripping Block
 315SC-11-0     Aft Lashing
 315SC-11-1-0   Wire Rope
 315SC-12-0     Floating Beam
 315SC-13-0     Boat Fall Unit
 315SC-14-0     Power Packer
 315SC-15     Warning Plate
 315SC-16    Operation


                                          ATTACHMENT TO
                         CERTIFICATE No. MED118009SH/002
  




  Lenght of ramp: 7.911 meters.
  Breadth: 2.78 meters
  Safety working Laoad: 65 kn.
  Angle of ramp: 35 deg
  Capacity of drum: 50 meter
  Steel wire diameter: 18 x 19+FC, 20mm.
  Hydraulic system working pressure: 17.5 Mpa
  Hydraulic system safety valve setting pressure: 20Mpa
  Type of motor: Y160L-4-H manufactured by Dezhou Hengli Electrical Machinery Co., Ltd
  Winch braking test load: 97.5kn
  Recovery test load: 42kn
  Dynamic test load: 71.5kn
  Static test load: 143kn
  Minimum launching load: 36kn

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****