MED167825XPENGB- -  -  N- Fomtec ARC 1x1 NV  -N- S- S- -21/11/2025- Marine Equipment- - SN- S- - N-  - 487,000B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED167825XP- N-Nov 20, 2030487000
 
Form
  Marine Equipment(TO)
MED167825XP
Certification N. MED167825XP - (ENG)
Certificate date 21/11/2025
Description
Fixed low expansion foam fire extinguishing systems components for machinery spaces and tanker deck protection,Expansion foam for fixed fire extinguishing systems for chemical tankers
Type Protezione antincendio
Product Fixed low expansion foam fire extinguishing systems components for machinery spaces and tanker deck protection,Expansion foam for fixed fire extinguishing systems for chemical tankers
Item Nº MED/3.58,MED/3.59

Model or Denomin.
Items
Fomtec ARC 1x1 NV
Applicant DAFO FOMTEC AB
Place of requester VINDKRAFTVAGEN 8  %  SE-135 70 Stockholm  % SWEDEN
Tel. N.,Fax, Email +46 8 506 405 00, ---, jan-erik.jonsson@fomtec.com
Directive (EU) 2025/1533
Standards IMO MSC.1/Circ.1312,IMO MSC.1/Circ.1312/Corr.1
Reference Documents SOLAS 74 Reg.II-2/10, IMO Res.MSC.98(73)-(FSS Code) 6, IMO Res.MSC.98(73)-(FSS Code) 14, IMO MSC/Circ.1239, IMO MSC.1/Circ.1276.,IMO Res.MSC.4(48)-(IBC Code) 11, IMO MSC/Circ.553.
Request 2020-08-04
Expire date 20/11/2030
Head Office Gdańsk
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Anna Maria Baranska S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED167825XP

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.58,MED/3.59
Description Fixed low expansion foam fire extinguishing systems components for machinery spaces and tanker deck protection,Expansion foam for fixed fire extinguishing systems for chemical tankers
Type Fomtec ARC 1x1 NV
Applicant DAFO FOMTEC AB
VINDKRAFTVAGEN 8,SE-135 70 Stockholm,SWEDEN
Testing standards IMO MSC.1/Circ.1312,IMO MSC.1/Circ.1312/Corr.1
Reference standards SOLAS 74 Reg.II-2/10, IMO Res.MSC.98(73)-(FSS Code) 6, IMO Res.MSC.98(73)-(FSS Code) 14, IMO MSC/Circ.1239, IMO MSC.1/Circ.1276.; IMO Res.MSC.4(48)-(IBC Code) 11, IMO MSC/Circ.553.
Issued in Gdańsk on
This Certificate is valid until
November 21, 2025
November 20, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Anna Maria Baranska
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED167825XP
Page 1 of 3

Technical Characteristics

FOAM CONCENTRATE Fomtec ARC 1x1 NV
Mixing Ratio
1
%
Specific Gravity at 20°C
1,060 ± 0,010
g/ml
Viscosity at 20ºC
≤ 100
mPa·s
PH at 20ºC
7,5 ± 1,0
-
Expansion Ratio at 20ºC
≥ 6,0
-
Drainage Time 20°C
≥ 3:00
minutes
Minimum temperature for use
-12
°C
Maximum temperature for use
+55
°C
Field of Application

This approval does not address the foam generating equipment, only the foam concentrate.

Fixed foam fire extinguishing systems using low expansion foam concentrate for extinguishing fires of following products at ambient temperature and pressure:


- Chemical Products as per list of Chapter 17, International Bulk Chemical Code (Column L - Letters A, B and D);
- Chemicals to which the IBC Code nor the BCH Code apply as per list set out in IMO Circular MSC/Circ. 553.

Technical Documentation

Technical Specification – Fomtec ARC 1X1 NV filed by RINA with n° PLFP/752
TDS - Fomtec ARC 1x1 NVARC 1x1 NV filed by RINA with n° PLFP/751

Tests

According to IMO MSC.1/Circ.1312 & MSC.1/Circ.1312/Corr.1- "Revised guidelines for the performance and testing criteria, and surveys of foam concentrates for fixed fire-extinguishing systems", Test report filed by RINA with n° PLFP-749

Note

The foam concentrate should be delivered with a declaration (i.e., Batch Certificate) of the main characteristics (sedimentation, pH value, expansion ratio, drainage time and volumetric mass). The declaration will be the basis for the annual condition test.

The storage container should be compatible with the foam concentrate throughout the service life of the foam.




ATTACHMENT TO
CERTIFICATE No. MED167825XP
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Anna Maria Baranska
**** NOTICE: This is NOT an official certificate ****