Veil of glass fiber named SHS 75/4 having mass per area of 75 g/m2 and thickness 0,70 mm bonded by effect of 5,6 g/m2 of resin to glass wool support having density greater than 15 kg/m3 .
The possible variants are as described in the table below.
- Thickness range (mm) from 10 to 120
- Nominal density range (kg/m3) from 15 to 100 ± 10 %
Product | Sea
Offshore | Delivery form - plate | Coating Aluminium | Density glass wool* | Field of application |
| Saglan SO-P Vs SL 7 | SO | -P | Vs | SL | 7 |
| Saglan SO-P Vs L 7 | SO | -P | Vs | L | 7 |
| Saglan SO-P Vs ML 7 | SO | -P | Vs | ML | 7 |
| Saglan SO-P Vs M 7 | SO | -P | Vs | M | 7 |
| Saglan SO-P Vs MP 3 | SO | -P | Vs | MP | 3 |
| Saglan SO-P Vs MH 3 | SO | -P | Vs | MH | 3 |
| Saglan SO-P Vs H 3 | SO | -P | Vs | H | 3 |
| Saglan SO-P Vs HR 3 | SO | -P | Vs | HR | 3 |
| Saglan SO-P Vs VH 3 | SO | -P | Vs | VH | 3 |
| Saglan SO-P Vs EH 3 | SO | -P | Vs | EH | 3 |
* SL= super light (15 kg/m3) HR= heavier (60 kg/m3) comfort = 7 L= light (20 kg/m3) VH= very heavy (80 kg/m3) acoustic = 3
ML= medium light (25 kg/m3) EH= extra heavy (100 kg/m3)
M= medium (30 kg/m3) H= heavy (50 kg/m3)
MP=medium plus (35 kg/m3)
MH= medium heavy (40 kg/m3)

ATTACHMENT TO
CERTIFICATE Nr. MED132617CS/001
Page 2 of 3
Field of application
As finishing material for all exposed interior and concealed or inaccessible surfaces.
On the basis of the value of the total heat release (Qt) and on the basis of the value of the peak heat release (qp) the material is deemed not generating excessive quantities of smoke nor toxic products in fire according to Annex 2 IMO 2010 FTP Code.Tests carried out
Tests as per RINA Test Laboratory reports Nos. 2017CS011326/1 and 2017CS011326/3 dated 24 May 2017 issued according to:
- IMO 2010 FTP Code Part 5;
- ISO 1716: 2010.