MED183724CSENGD- -  -  N- B15 BLIND HINGED DOOR - B15DHB1 -N- S- S- -13/05/2024- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED183724CS- N-Apr 13, 2029597421
 
Form
  Marine Equipment(TO)
Certification N. MED183724CS - (ENG)
Certificate date 13/05/2024
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
B15 BLIND HINGED DOOR - B15DHB1
Applicant BLU BUD SRL
Place of requester VIA CORSICA 21/20  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Request 16/04/2024
Validity 13/04/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED183724CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type B15 BLIND HINGED DOOR - B15DHB1
Applicant BLU BUD SRL
VIA CORSICA 21/20,16128 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of 1974 SOLAS Convention as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 13, 2024
April 13, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED183724CS
Page 1 of 3





Product description

Single leaf hinged door with maximum clear opening size of 1000 x 2100 mm (WxH). The leaf, having dimensions of 1031 x 2110 mm (WxH) is composed of two steel sheets, 1 mm thick each and, in between, the insulating material composed of one layer of mineral wool (certified non combustible in conformity to the requirements of the IMO FTP Code) having density of 150 kg/m3 and thickness of 40 mm. The door is fitted with three L shaped vertical stiffeners, having dimensions of 20x30 mm and thickness of 1.5 mm, tack welded to the steel sheet on the hinged side. The door frame is composed of an hollow steel profile having thickness of 1.5 mm. The leaf may be fitted with square window having maximum clear light of 310 x 310 mm; the glass compound, type PYROBEL 16 EI 30 (manufacturer AGC) and having minimum total thickness of 17.3 mm, is composed of three panes and, in between, two layers of thermo-expanding gel. The window frame is composed of steel profiles having thickness of 1.5 mm fixed to the leaf with screws fitted with pitch of 126 mm. The leaf may be fitted with ventilation louvre having maximum dimensions of 380 x 190 mm (WxH). The leaf is fitted, on the upper side, with a concealed door closer and with a flush over panel, having height of 120 mm, composed of two steel sheets, 1.5 mm thick each and, in between, a mineral wool layer type PAROC MARINE SLAB 150.
The door may be supplied with the trade name complete of the following codes:

CODE
DESCRIPTION
A
DOOR WITH VENTILATION LOUVRE
B
DOOR WITH PORTHOLE
C
DOOR WITH AUTOMATIC METALLIC DOOR SEAL
D
DOOR WITH CONCEALED DOOR CLOSER
E
DOOR WITH HIDDEN HINGES
F
COMMUNICATING DOOR





 



ATTACHMENT TO
CERTIFICATE Nr. MED183724CS
Page 2 of 3

Field of application

Fire resistant B-15 Class single leaf hinged door for general application.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design

Reference documents

BLU BUD drawing No. B15DHB1 Rev. 1 dated 1 September 2015 approved on 2 September 2015 with endorsement No. LABS-1125.

Tests carried out

Test as per RINA Test Laboratory reports No. 2014CS01809/1 dated 14 April 2014 and No. 2015CS01663/1 dated 19 March 2015 issued according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED183724CS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****