MED302825CS!002ENGB- -  -  N- A30 steel deck - B15 PML ceiling -N- S- S- -08/09/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED302825CS/002- N-Sep 7, 2030704840
 
Form
  Marine Equipment(TO)
MED302825CS/002
Certification N. MED302825CS/002 - (ENG)
Certificate date 08/09/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items
A30 steel deck - B15 PML ceiling
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2024/1975
Standards IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Reference Documents SOLAS 74 Reg.II-2/3.2,IMO Circ. MSC.1 1434,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO Circ. MSC.1 1621,IMO Circ. MSC.1 1616
Request 20/05/2025
Expire date 07/09/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
No. MED302825CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type A30 steel deck - B15 PML ceiling
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards applied IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Regulations specified and reference documents SOLAS 74 Reg.II-2/3.2; IMO Circ. MSC.1 1434; SOLAS 74 Reg. II-2/9; IMO MSC/Circ. 1120; IMO Circ. MSC.1 1621; IMO Circ. MSC.1 1616
Issued in Genoa on
This Certificate is valid until
September 8, 2025
September 7, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
No.  MED302825CS/002
Page 1 of 2

Product description



Membrane protection of a steel deck structural core performed, 300 mm below the deck plating, by ceiling composed of panels having maximum width of 1200 mm consisting of one slab of product named PLURATECT MARINE LIGHT having 19 mm thick and density of 500 kg/m3. The panels are fixed to “C” shaped steel profiles, 0.6 mm thick, having dimensions of 27x49x27 mm and fitted with pitch of 600 mm, by means of screws, having diameter of 3.5 mm, positioned with pitch of 200 mm; the “C” shaped steel profiles are internally filled with a layer of fiber blanket DALFRATHERM 1260 ULS Blanket having thickness of 25 mm and density of 128 Kg/m3. The panels joints are obtained approaching the panels and relevant fixing to the “C” shaped profiles with flanked screws (one for each panel) and pitch of 200 mm. The ceiling may be equipped with a transversal joint made by “C” shaped steel profiles, 0.6 mm thick, having dimensions of 27x49x27 mm installed transversally to the longitudinal “C” profiles. The transversal “C” shaped profiles are supported by means of suspension hangers having diameter of 3.9 mm, welded to the upper deck, staggered, with pitch of 800 mm. The “C” profiles are inserted on the ceiling edges, in other “U” shaped profiles, 0.6 mm thick and having dimensions of 29x29x29 mm, fixed to the perimeter bulkhead by means of screws, having diameter of 3.5 mm, fitted with a ranging pitch from 350 up to 500 mm.

Field of application

Fire resisting A-30 Class steel deck.
Reference documents

PROMAT drawing No. R61 DAM 25, Rev. 1, included in the RINA Laboratory Test Report No. 2025CS013028 issued on 08 September 2025.
Tests carried out

Test as per RINA Laboratory Test Report No. 2025CS013028 issued on 08 September 2025 according to IMO Res. MSC.307(88)-(2010 FTP Code), as amended.




ATTACHMENT TO
No. MED302825CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****