MED029223WSENGD- -  -  N- LNK-ELD-SA & LNK-ELD-SA(LR) -N- S- S- -14/03/2023- Marine Equipment- - SN- S- - N-  - 1,178,895B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED029223WS- N-Mar 13, 20281178895
 
Form
  Marine Equipment(TO)
Certification N. MED029223WS - (ENG)
Certificate date 14/03/2023
Type Mezzi di salvataggio
Product Embarkation ladders
Item Nº MED/1.29
USCG Category N° 160.117

Model or Denomin.
Items
LNK-ELD-SA & LNK-ELD-SA(LR)
Applicant XIAMEN LONAKO Inc.
Place of requester 1019-2 Wanjiachun Road, Torch High-tech Zone(Xiangan) Xiamen (Fujian)  % CHINA
Tel. N.,Fax, Email 0592-5606076, ---, vicky@lonako.com
Directive (EU) 2022/1157
Standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference Documents Reg. III/4, III/11, III/34 and Reg. X/3 of SOLAS 74 Convention as amended,IMO Res.MCS.48(66)-(LSA Code) I, IMO Res.MCS.48(66)-(LSA Code) VI, IMO MSC.1/Circ.1285,IMO MSC.1/Circ.1630.
Expire date 13/03/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED029223WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.29
USCG Category Nº 160.117
Description Embarkation ladders
Type LNK-ELD-SA & LNK-ELD-SA(LR)
Applicant XIAMEN LONAKO Inc.
1019-2 Wanjiachun Road, Torch High-tech Zone(Xiangan) Xiamen (Fujian),CHINA
Testing standards IMO Res.MSC.81(70), as amended,ISO 5489:2008.
Reference standards Reg. III/4, III/11, III/34 and Reg. X/3 of SOLAS 74 Convention as amended; IMO Res.MCS.48(66)-(LSA Code) I, IMO Res.MCS.48(66)-(LSA Code) VI, IMO MSC.1/Circ.1285; IMO MSC.1/Circ.1630.
Issued in SHANGHAI on
This Certificate is valid until
March 14, 2023
March 13, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED029223WS
Page 1 of 2
PRODUCT DESCRIPTION

- The embarkation ladder is assembled with two side ropes on each side continuous from the top of the ladder

to the bottom(Manila rope).

- Each step is supported by each side rope.

- Steps:

LNK-ELD-SA:

The steps are made of composite materials. LXBXH (528x117x26.9, at thinnest point) mm.

LNK-ELD-SA(LR):

The lowest four steps are made of rubber material. LXBXH (525x115x30, at thinnest point) mm.

The remaining steps are made of composite material. LXBXH (528x117x26.9 at thinnest point) mm.

- Each side rope has a breaking strength of at least 24 kN.

- Ladder length: 2m~43m

REFERENCE DOCUMENTS

Appr. Dwg. Title


SHST-46022 Embarkation Ladders-LNK-ELD-SA(USCG)
SHST-46023 Embarkation Ladders-LNK-ELD-SA(LR)(USCG)

TESTS CARRIED OUT
- Embarkation ladder has been tested in compliance with ISO 5489:2008, and test report is filed by RINA.

REMARKS
- Each ladder is to be marked in compliance with ISO 5489:2008, Par 7.
- Each replacement step is to be marked in compliance with ISO 5489:2008, Par 7.




ATTACHMENT TO
CERTIFICATE No. MED029223WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****