FAB307323WSENG- -  -  N- Elbow, Tee, Cross, Cap, Reducer, material: Carbon steel, Austenitic stainless steel, Duplex stainless steel -N- S- S- -16/08/2023- Fabbricanti Approvati- - NN- N- - S-  - 1,209,206BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB307323WS- N-Aug 16, 20281209206
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB307323WS - (ENG)
Certificate date 16/08/2023
Type Approvazione di fabbricanti di materiali
Product Fittings senza saldatura per tubolature

Model or Denomin.
Items
Elbow, Tee, Cross, Cap, Reducer,  material: Carbon  steel, Austenitic stainless steel, Duplex stainless steel
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 16/08/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB307323WS/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless pipe fittings
Type Elbow, Tee, Cross, Cap, Reducer,  material: Carbon  steel, Austenitic stainless
steel, Duplex stainless steel

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until August 16, 2028
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB307323WS/001
Enclosure - Page 1 of 1
Carbon & Carbon-manganses steel, Austenitic stainless steel

APPROVAL CONDITIONS



-Manufacturing process: Pipes fittings made from pipes with hot forming or cold drawing;

Steel type
Grade
Manufacturing method1)
Max. outer diameter [mm]
Max. wall thickness [mm]
Delivery condition2)
C and
C-Mn
WPcBac. ASTM A234
HFS, CFS
813
59.54
N
P235TR2acc. EN 10216-1
HFS, CFS
813
59.54
N
P265TR2acc. EN 10216-1
HFS, CFS
813
59.54
N
Austenitic
WP304acc. ASTM A403
HFS, CFS
610
59.54
SHT
WP304Lacc. ASTM A403
HFS, CFS
610
59.54
SHT
WP316acc. ASTM A403
HFS, CFS
610
59.54
SHT
WP316Lacc. ASTM A403
HFS, CFS
610
59.54
SHT
1.4301acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4306acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4307acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4401acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4404acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4435acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4436acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4541acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
1.4550acc. EN 10253-3 and -4
HFS, CFS
610
59.54
SHT
Duplex stainless steel
2205(S32205) ASTMA815
HFS, CFS
610
59.54
SHT
2507 ASTMA815 S32760
HFS, CFS
610
59.54
SHT
Remarks:





1) HFS: hot finished seamless




CFS: cold finished seamless & welded




2) N: Normalised





SHT: Solution Heat Treated (solution annealing)





Note: Raw material is to be provided by Approved manufacturer.

Survey conditions:
The pipes fittings are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

shanghai Aug 05, 2023
**** NOTICE: This is NOT an official certificate ****