MED137926CSENGD- -  -  N- A60 BLIND HINGED DOOR SINGLE LEAF -N- S- S- -11/03/2026- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED137926CS- N-Mar 10, 2031597421
 
Form
  Marine Equipment(TO)
Certification N. MED137926CS - (ENG)
Certificate date 11/03/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
A60 BLIND HINGED DOOR SINGLE LEAF
Applicant BLU BUD SRL
Place of requester VIA CORSICA 21/20  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ. 1511/Rev.1
Request 26/02/2026
Expire date 10/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED137926CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type A60 BLIND HINGED DOOR SINGLE LEAF
Applicant BLU BUD SRL
VIA CORSICA 21/20,16128 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ. 1511/Rev.1
Issued in Genoa on
This Certificate is valid until
March 11, 2026
March 10, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED137926CS
Page 1 of 2

Product description

Single leaf hinged door whit maximum clear opening size of 1000 mm wide and 2200 mm high. The leaf having width of 1042 mm and height of 2215 mm, is composed of two carbon steel sheets, 1 mm thick each and, in between the insulating material compound. This compound is composed of a product named PROMAT PROMASIL, having thickness of 54 mm and density of 290 kg/m3 glued to the steel sheets by means of adhesive type PROTOPUR AE 150. The leaf may be fitted with a window, having clear light of 300x300 mm, composed of a glass type PYROBEL 25, having total thickness of 26.6 mm. The window frame, composed of S shaped steel profiles 2 mm thick mm, is fixed to the leaf by means of M5 bolts fitted with pitch of 100 mm. The door frame is not covered by insulation material and composed of an U shaped steel profile having thickness of 3 mm and dimensions of 78x42x65 mm, bolted by means of M8 bolts to an L shaped steel profile having thickness of 5 mm and dimensions of 60x60 mm, bolted to the bulkhead by means of M8 bolts (pitch of 150 mm). The door is fitted with concealed hinges type CEAM series 1030, a lock type TRIOVING series 53, a concealed door closer (inactive) and a self-closing hose port having dimensions of 182x200 mm.
Field of application
Fire resistant A-60 Class single leaf hinged door for general application.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2
- maximum door size tested
- door used with a fire tested frame design
Reference documents
BLU BUD drawing No. 20042_A60 DHB1 Rev.2 approved on 12 March 2021 with endorsement No. LABS-2195.

Tests carried out
Test as per RINA Fire Protection Laboratory report No. 2021CS01960 issued on 12 March 2021 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED137926CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****