MED516825CS!001ENGD- -  -  N- S-MFD / S-HFD -N- S- S- -21/11/2025- Marine Equipment- - SN- S- - N-  - 417,657B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED516825CS/001- N-Oct 12, 2030417657
 
Form
  Marine Equipment(TO)
Certification N. MED516825CS/001 - (ENG)
Certificate date 21/11/2025
Type Protezione antincendio
Product Sbarramenti antincendio
Item Nº MED/3.22
USCG Category N° 164.139

Model
Items/Sizes
S-MFD / S-HFD
Applicant SAGICOFIM S.P.A.
Place of requester VIA FIRENZE, 1  %  20063 Cernusco Sul Naviglio (MI)  % ITALY
Tel. N.,Fax, Email 02 929021, 02 92902300, r.dandrea@sagicofim.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/9,IMO MSC.1/Circ.1655.
Request 10/11/2025
Validity 12/10/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED516825CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.22
USCG Category Nº 164.139
Description Fire dampers
Type S-MFD / S-HFD
Applicant SAGICOFIM S.P.A.
VIA FIRENZE, 1,20063 Cernusco Sul Naviglio (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/9; IMO MSC.1/Circ.1655.
Issued in Genoa on
This Certificate is valid until
November 21, 2025
October 12, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED516825CS/001
Page 1 of 2

Product description

Fire dampers having maximum size of 2000x1000 (WxH) mm and thickness of 300 mm fitted, in the middle, with a mullion. Frame composed of stainless steel or carbon steel sheet having thickness of 3 mm (S-MFD type) or 4 - 5 mm (S-HFD type). The mullion, fitted in the middle and having width of 30 mm is composed of two C shaped stainless steel or carbon steel profiles having thickness of 3 mm. Blades composed of an hollow profile made by four stainless steel or carbon steel sheets, 0.6 mm thick each, having thickness of 23 mm and height ranging from 147 up to 212 mm. The dampers are fitted with an actuator having minimum torque of 12 Nm and a thermal cut-off fuse with temperature ranging from 72°C up to 140°C. The A-60 Fire dampers are insulated with one layer of mineral wool (certified non combustible in compliance with IMO FTP Code) having density of 100 kg/m3 and thickness of 60 mm. The mineral wool panels, fixed by means of steel pins and washers, are also applied, on the coaming, for a length of 825 mm.

Field of application
Fire resistant A-0 and A-60 Class fire dampers fitted on bulkheads and on decks.

Reference documents
SAGICOFIM SpA drawings Nos. 033230 dated 10 June 2020, 033451 dated 10 June 2020, 033452 dated 27 July 2020, 033454 dated 3 August 2020, 033455 dated 27 July 2020 and No. 033453 dated 27 July 2020 approved on 12 October 2020 and on 13 October 2020 respectively with endorsement Nos. LABS-2086, LABS-2087, LABS-2088, LABS-2090, LABS-2089 and LABS-2091.
SAGICOFIM SpA drawing No. 035843 dated 11 May 2022, RINA Number 2022CS011569/1.

Tests carried out
Tests as per RINA Test Laboratory Reports Nos. 2020CS011671/2, 2020CS011671/3, 2020CS011671/4, 2020CS011671/6 and 2020CS011671/7 dated 12 october 2020 and No. 2020CS011671/5 dated 13 October 2020 issued according to IMO 2010 FTP Code Part. 3.




ATTACHMENT TO
CERTIFICATE No. MED516825CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****