Double leaf sliding door with maximum clear light of 5850x2850 mm (WxH). The door leaves, having maximum dimensions of 2995x2888 mm (WxH) and 2998x2888 mm (WxH), are composed of two carbon steel sheets, 1.2 mm thick each and, in between, the insulating materials, composed of one composite panel named KNAUF PBE FIRE BOARD M18V, 50 mm thick and having density of 180 kg/m3 and one layer of material named PROMAGLAF GM, having thickness of 12.6 mm and density of 165 kg/m3. The insulating materials are glued together and to the steel sheets by means of 500 g/m2 of adhesive type PROMACOL MARINE. The doors having width greater than 4000 mm are fitted, on the lower side, with a long tenon having dimensions of 8x25 mm. The leaves are fitted inside, with C shaped steel stiffeners, 1.2 mm thick and having dimensions of 60x20 mm tack welded (pitch of 250 mm) symmetrically to the two steel sheets with pitch of 500 mm. Inside the perimeter of the leaf is fitted, on the upper side and on the vertical side opposite to the lock, with an U shaped steel profile, 6 mm thick and having dimensions of 60x30 mm. Outside the perimeter of the leaf is fitted with a C shaped stainless steel profile having thickness of 1.2 mm and dimensions of 64.8x15 mm. The door frame is composed of steel profiles having thickness of 5 mm. The door may be fitted with a self-closing hose port having maximum dimensions of 160x188 mm.
Field of application Fire resistant A-60 Class double leaf sliding door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf
- maximum door size tested
- door used with a fire tested frame design
Reference documents Naval Suppliers drawings No. FT-SLA62-242418-R0-LC dated 27 July 2018, No. FT-SLA62-242418-R0-LO dated 12 September 2018, No. FT-SLA61-242417-RINF dated 7 November 2018 and No. A62SLEX001WA22 dated 22 January 2019 approved on 4 October 2018, 8 November 2018 and on 15 March 2019 respectively with endorsement Nos. LABS-1728, LABS-1729, LABS-1754 and LABS-1823. Naval Suppliers drawing No. FT-SLA62-4000x2850 dated 8 September 2023 and identified with No. 2022CS011909.
Tests carried out Test as per RINA Test Laboratory reports No. 2018CS012348/2 and No. 2018CS012348/4 dated 4 October 2018, No. 2018CS012701/1 and No. 2018CS012701/2 dated 8 November 2018 issued according to IMO 2010 FTP CODE Part 3. Increased dimensions verified with RINA Technical Reports No. 2019-002-MITHP dated March 2019 and No. 2023-001-MITHP Rev. 0 dated September 2023. |