FAB786125WS!001ENG- -  -  N- Austenitic stainless steel RINA grades 304L - 316L or equivalent steel according to recognized standards -N- S- S- -15/11/2025- Fabbricanti Approvati- - NN- N- - S-  - 1,057,099BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB786125WS/001- N-Nov 14, 20301057099
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB786125WS/001 - (ENG)
Certificate date 15/11/2025
Description
Tubi in acciaio non saldati in acciaio austenitico inossidabile,Tubi in acciaio saldati in acciaio inossidabile
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio non saldati in acciaio austenitico inossidabile,Tubi in acciaio saldati in acciaio inossidabile

Model or Denomin.
Items
Austenitic stainless steel RINA grades 304L - 316L or equivalent steel according to recognized standards
Applicant
Standards RINA Rules for the approval of manufacturers of materials
Expire date 14/11/2030
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB786125WS/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Seamless Steel Tubes in Austenitic Stainless Steel,Welded stainless steel pipes and tubes
Type Austenitic stainless steel RINA grades 304L - 316L or equivalent steel
according to recognized standards

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until November 14, 2030
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB786125WS/001
Enclosure - Page 1 of 1
Austenitic stainless steel RINA grades 304L - 316L or equivalent steel according to recognized standards

APPROVAL CONDITIONS


1. Welded pipes and tubes in austenitic stainless steel

Outside diameter: Max. 1016 mm, Wall Thickness: Max. 22 mm
Manufacturing process: PAW - GTAW.
Heat treatment: solution annealing at 1050 - 1150 °C
Non destructive examination of welded seam: ultrasonic or radiographic test

2. Seamless pipes and tubes in austenitic stainless steel

Outside diameter: Max. 610 mm, Wall Thickness: Max. 35 mm
Manufacturing process: cold drawn or cold rolled
Heat treatment: solution annealing at 1050 - 1150 °C .

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

Note: The raw materials should be provided by RINA approved manufacturer.

General conditions for the approval:
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine 11/15/2025
**** NOTICE: This is NOT an official certificate ****