MED591926WSENGB- -  -  N- BH-FS5 -N- S- S- -04/08/2026- Marine Equipment- - SN- S- - N-  - 309,835B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED591926WS- N-Aug 3, 2031309835
 
Form
  Marine Equipment(TO)
MED591926WS
Certification N. MED591926WS - (ENG)
Certificate date 04/08/2026
Type Mezzi di salvataggio
Product Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Item Nº MED/1.26a

Model or Denomin.
Items
BH-FS5
Applicant QINGDAO BEIHAI BOATBUILDING CO., LTD.
Place of requester Floor 3,Building 47,No.369 Lijiang East Road,Huangdao District,Qingdao City,Shandong Province,China
Tel. N.,Fax, Email 0532-86756822, 0532-86756800, YTJISHU@QBSIC.COM
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419, IMO MSC.1/Circ.1630 Rev 2.
Expire date 03/08/2031
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Ai Nian Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED591926WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.26a
Description Release mechanism for: (a) lifeboats and rescue boats (launched by a fall or falls)
Type BH-FS5
Applicant QINGDAO BEIHAI BOATBUILDING CO., LTD.
Floor 3,Building 47,No.369 Lijiang East Road,Huangdao District,Qingdao City,Shandong Province,China
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/16, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) IV, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1419, IMO MSC.1/Circ.1630 Rev 2.
Issued in SHANGHAI on
This Certificate is valid until
August 4, 2026
August 3, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Ai Nian Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED591926WS
Page 1 of 2

TECHNICAL DATA


Product Description:
- Safety Working Load, SWL = 5 T
- The mechanism with two release capabilities: normal (off load) release capability and on-load release capability.
- A hydrostatic interlock is provided which may automatically reset upon lifting the boat from the water.
- The mechanism is in compliance with IMO Resolution.MSC.48(66) as amended by IMO Resolution
MSC.320(89) and MSC.554(108).

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-41216 BH-FS5 Release Hook (SHST/2021/00761/LEIGU).

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the release mechanism was tested under witnessing


of RINA as per Prototype Test Report dated on 08/Apr./2021.

NOTE
- Materials as stated on the approved drawing are to be delivered with maker's product certificates.
- Our review and approval is based on Original Prototype MED Module B issued by RINA, refer to Module B
Certificate MED208521WS issued on Aug. 4th, 2021. As informed by manufacturer, initial condition is kept.
- The previous issued MED Module B Certificate No.:MED208521WS is replaced accordingly.




ATTACHMENT TO
CERTIFICATE No. MED591926WS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Ai Nian Zhang
**** NOTICE: This is NOT an official certificate ****