MED093122CS!004ENGD- -  -  N- FRP D 002J-A -N- S- S- -14/03/2022- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED093122CS/004- N-Mar 13, 2027162855
 
Form
  Marine Equipment(TO)
Certification N. MED093122CS/004 - (ENG)
Certificate date 14/03/2022
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
FRP D 002J-A
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471800, info@somecgroup.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 25/02/2022
Expire date 13/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED093122CS/004

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type FRP D 002J-A
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code) - IMO MSC.1/Circ. 1319
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 14, 2022
March 13, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED093122CS/004
Page 1 of 3





Product description

Glazed single leaf hinged door adjacent to a fixed glazed panel. Leaf maximum dimensions are 1092x1952 mm (WxH) and maximum clear opening is 1000x1910 mm(WxH). The glass panes, having clear opening size of 922x1780 mm (door) and 842x1900 mm (fixed panel), are composed, moving from the exposed side, of a glass type PYRAN S (manufacturer Schott AG - Germany) fitted with or without deposited metallic oxides and having thickness of 6 mm, a void space, 9 mm thick and a toughened pane having thickness of 8 mm, with or without deposited metallic oxides, manufactured by Soglass. The door frame, the fixed panel frame and the glass retaining frame are composed of hollow stainless steel profiles having thickness of 1.5 mm bolted by means of M10 screws, on the side not exposed to the fire, to steel flats having dimensions of 60x6 mm (lower part) and to L shaped carbon steel profiles having dimensions of 60x40x6 mm (upper part) and 60x60x6 mm (other sides). On the upper side U shaped steel profiles having thickness of 4 mm and dimensions of 50x59 mm are fitted between the frame and L shaped profiles and bolted to the same. Between the glass faces, the frame and the glass retaining frames, gaskets of KERAFIX FLEXLIT type, are fitted. Between the glass edges and the frame, on lower side, also spacers of calcium silicate having dimensions of 25x15x6 mm, are fitted. Between door frame and glass frame intumescing strips type SEALBIFIRE S BLACK, are fitted. The glass panes are sealed by means of sylicone type PENSIL 300. The door may be fitted with door check.














 



ATTACHMENT TO
CERTIFICATE Nr. MED093122CS/004
Page 2 of 3



Field of application

Fire resistant A-0 single leaf hinged glazed door adjacent to a fixed glazed panel with fire hazard on side fitted with the toughened pane having thickness of 6 mm. Fire resistant A-0 Class single leaf hinged door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and with of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
Reference documents

SOMEC MARINE drawing No. SDM-34 dated 8 March 2012 approved on 15 March 2012 with endorsement No. LABS-648.

Tests carried out

Tests as per RINA Test Laboratory Report No. 2012CS01712/5 issued on 15 March 2012 according to IMO Res. A. 754(18) and to IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED093122CS/004
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****