ELE306326CS!002ENG- -  -  N- TK SEA01, TK SEA02,0.6/1 kV -N- S- S- -26/05/2026- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 153,665Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE306326CS/002- N-May 26, 2031153665
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE306326CS/002 - (ENG)
Certificate date 26/05/2026
Type Impianti Elettrici
Product CAVI ELETTRICI

Model or Denomin.
Items
TK SEA01, TK SEA02,0.6/1 kV
Applicant TECNIKABEL S.P.A.
Place of requester VIA BRANDIZZO 243  %  10088 Volpiano (TO)  % ITALY
Tel. N.,Fax, Email +39 011 9951997, 011 9953062, CLERICI@TECNIKABEL.IT
Standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
Expire date 26/05/2031
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE306326CS/002
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description ELECTRIC CABLES
Type TK SEA01, TK SEA02
0.6/1 kV

Applicant TECNIKABEL S.P.A.
VIA BRANDIZZO 243
10088 Volpiano (TO)
ITALY
Reference standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
  

 
 
   .   This Certificate is valid until May 26, 2031
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE306326CS/002
Enclosure - Page 1 of 1
TK SEA01, TK SEA02,0.6/1 kV
Materials/Components

Power cables, fire retardant, low smoke, halogen free, with optional fire resistant and armoured constructions for ships and offshore units.

Rated voltage: 0.6/1 kV

Type: TK SEA01, TK SEA02


Characteristic
Description
Cable type
TK SEA01, TK SEA02
Rated Voltage
0.6/1 KV
Maximum conductor temperature
90°C
Conductor
Bare stranded annealed Cu, IEC 60228 Cl.2,Cl.5 or Cl.6
Fire resistant barrier
Mica tape over conductor (TK SEA02 only)
Insulation
XLPE
Core assembly
In layers with fillers if required
Inner sheath (optional)
SHF1
Armour (optional)
GSWB or plain/tinned Cu braid
Outer sheath
SHF1 (TK SEA01) or SHF2 (TK SEA02)
Marking
TECNIKABEL (TO) - ITALY - (week/year) - Type - n° x section mm² - Rated Voltage - Applicable Standard



In accordance with IEC 60228; IEC 60092-350; IEC 60092-353; IEC 60092-360; IEC 60332-1-2; IEC 60332-3-22 Category A; IEC 60332-3-10; IEC 61034-2;IEC 60754-1;IEC 60754-2; RINA Rules for Ships; RINAMIL Rules; RINA Rules for FRSRU.

Additionally for TK SEA02: IEC 60331-2 (fire resistant circuit integrity).

Type tested constructions include non-armoured SHF1 constructions, armoured SHF2 constructions incorporating tinned copper wire braid armour (TCWB), and fire resistant constructions incorporating mica tape.


Technical Specifications:

ZZ62475-P_REV1 dated 11/06/2025;
ZZ62476-P_REV2 dated 16/06/2025.
EMC performance ((in the marking "EMC"): transfer impedance: ≤ 25 mohm/m (0-100 MHz) acc. to IEC 62153-4-3
Drilling fluid resistance according to IEC 60092-360 Tab.9-10 with sheath SHF2 (in the marking "SHF2")








Type Test Reports:
ZZ62475_117rev01 dated 16/06/2025;
ZZ62476_118rev00 dated 09/06/2025.
0083_DC_TOX_26 dated 20/05/2026.
0089_DC_TOX_26 dated 20/05/2026.
CN26-0133433-01 Rev.0 dated 18/05/2026
Test Report N°92 rev.1 (23-26/03/2026)
Test Report N°85 rev.1 (23-26/03/2026)

Reference documents
TAO-APP dated 25/07/2025
Offer 2026/16783accepted on 12/05/2026
The documents above-mentioned have been archived in the Leonardo Draw Plus portal under the project:
https://leodrawplus.rina.org/projects/82325/detail

Genoa July 24, 2026
**** NOTICE: This is NOT an official certificate ****