FAB382024XGENG- -  -  N- Aluminium sheets -N- S- S- -20/01/2025- Fabbricanti Approvati- - SN- N- - S-  - 1,041,691BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB382024XG- N-Jan 6, 20301041691
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB382024XG - (ENG)
Certificate date 20/01/2025
Type Approvazione di fabbricanti di materiali
Product Lamiere in lega di alluminio

Model or Denomin.
Items
Aluminium sheets
Applicant Speira GmbH
Place of requester Aluminiumstr. 1  %  D-41515 Grevenbroich  % GERMANY
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 06/01/2030
Responsible Office RINA Hamburg Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB382024XG
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Aluminium alloy sheets and plates
Type Aluminium sheets
Applicant Speira GmbH
Aluminiumstr. 1
D-41515 Grevenbroich
GERMANY
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until January 6, 2030
_________________________________
RINA Services S.p.A.
Pavlos Safralis
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB382024XG
Enclosure - Page 1 of 1
Aluminium sheets

APPROVAL CONDITIONS


The approval is granted for following material grades and temper conditions:
5083, H111/ H116/ H321

- The chemical composition and the mechanical properties are to be in accordance with the RINA requirements

- The products are to be tested according to the RINA Rules

- The approval is valid for products up to 10 mm thickness

- The assembly by welding shall be carried out by welding processes and consumables approved by RINA for the concerned grade of alloy.





General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.




RINA Hamburg Marine January 7, 2020
**** NOTICE: This is NOT an official certificate ****