FAB115025XG!004ENG- -  -  N- C-Mn steels grades: 360 - 410 - 460 - 510 - types HA-HB-HD,Low alloy steel grades: 0,3Mo-1Cr0,5Mo-2,25Cr1Mo -N- S- S- -27/05/2025- Fabbricanti Approvati- - NN- N- - S-  - 387,876BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB115025XG/004- N-Jun 30, 2030387876
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB115025XG/004 - (ENG)
Certificate date 27/05/2025
Type Approvazione di fabbricanti di materiali
Product Lamiere per caldaie, recipienti a pressione e per applicazioni a bassa temperatura

Model or Denomin.
Items
C-Mn steels grades: 360 - 410 - 460 - 510 - types HA-HB-HD,Low alloy steel grades: 0,3Mo-1Cr0,5Mo-2,25Cr1Mo
Applicant ILSENBURGER GROBBLECH GMBH
Place of requester Veckenstedter Weg 10 %  38871 Ilsenburg  % Germany
Tel. N.,Fax, Email 049 39452 858561, 049 39452 858700, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 30/06/2030
Responsible Office HAMBURG
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB1150XG/004
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel plates for boilers, pressure vessels and low temperature service
Type C-Mn steels grades: 360 - 410 - 460 - 510 - types HA-HB-HD
Low alloy steel grades: 0,3Mo-1Cr0,5Mo-2,25Cr1Mo

Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until June 30, 2030
_________________________________
RINA Services S.p.A.
Pavlos Safralis
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB1150XG/004
Enclosure - Page 1 of 1
C-Mn steels grades: 360 - 410 - 460 - 510 - types HA-HB-HD,Low alloy steel grades: 0,3Mo-1Cr0,5Mo-2,25Cr1Mo

APPROVAL CONDITIONS


Steel making process: basic oxygen process.

Casting process: continuous casting.

Deoxidation practice, chemical composition, mechanical properties, condition
of supply and survey conditions: the plates are to comply in all respects with the relevant RINA Rules
(Part D, Ch2, Sect.l, para.4 and 5) and are to be tested accordingly.

Maximum thickness: 60 mm

The approval is valid also for the equivalent pressure vessel steel grades according to EN 10028

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

Ilsenburger Grobblech GmbH is authorized to carry out inspection on his own responsibility acc. to valid Alternative Testing Scheme (ATS).

HAMBURG 27.05.2025
**** NOTICE: This is NOT an official certificate ****