MED566825CS!002ENG- -  -  N- Saglan SO-R -N- S- S- -17/03/2026- Marine Equipment- - SN- S- - N-  - 387,896B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED566825CS/002- N-Mar 16, 2031387896
 
Form
  Marine Equipment(TO)
Certification N. MED566825CS/002 - (ENG)
Certificate date 17/03/2026
Type Protezione antincendio
Product Materiali non combustibili
Item Nº MED/3.13
USCG Category N° 164.109

Model or Denomin.
Items
Saglan SO-R
Applicant SAGER AG
Place of requester DORNHUGELSTRASSE  %  CH-5724 DURRENASCH  % SWITZERLAND
Tel. N.,Fax, Email 0041 62 7678746, 0041 62767838, rolf.mueller@sager.ch
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. X/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7
Request 28/11/2025
Expire date 16/03/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED566825CS/002

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.13
USCG Category Nº 164.109
Description Non-combustible materials
Type Saglan SO-R
Applicant SAGER AG
DORNHUGELSTRASSE,CH-5724 DURRENASCH,SWITZERLAND
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3, SOLAS 74 Reg. X/3, SOLAS 74 Reg. II-2/5, SOLAS 74 Reg. II-2/9, IMO Res. MSC.36(63)-(1994 HSC Code) 7,IMO Res. MSC.97(73)-(2000 HSC Code) 7
Issued in Genoa on
This Certificate is valid until
March 17, 2026
March 16, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED566825CS/002
Page 1 of 2

Product description

Glass wool (roll) with low phenolic binder or non-phenolic bio-based binder.
  • Maximum organic content 5.05 %
Product Rolls
Sea Offshore
Delivery form - roll
Density glass wool*
Density [kg/m3]
Thickness range (mm)
Field of application*
Saglan SO-R  SL 7
SO
-R
SL
15
20 - 120
7
Saglan SO-R  L 7
SO
-R
L
20
20 - 120
7
Saglan SO-R  ML 7
SO
-R
ML
25
20 - 120
7
Saglan SO-R  M 7
SO
-R
M
30
15 - 120
7
Saglan SO-R  MP 3
SO
-R
MP
35
15 - 120
3
Saglan SO-R  MH 3
SO
-R
MH
40
20 - 120
3
Saglan SO-R  SH 3
SO
-R
SH
45
15 - 120
3


*Density description
Density [kg/m3]


SL = super light15


L = light20


ML = medium light25


M = medium30


MP = medium plus35


MH = medium heavy40


SH = super heavy45












*Field of application



7 = comfort3 = acoustic

Field of application
As non-combustible material.
Tests carried out
Tests as per RINA Test Laboratory reports Nos. 2025CS015668/1, 2025CS015668/2, 2025CS015668/3, 2025CS015668/4 dated 10 March 2026, issued according to IMO 2010 FTP Code Part 1.
Tests as per MPA Test Laboratory report No. 902 7272 025-20 dated 12 September 2025, issued according to ISO 1716:2018.




ATTACHMENT TO
CERTIFICATE No. MED566825CS/002
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****