| Window with central transom, having maximum overall clear size of 1000 x 1810 mm (WxH). The maximum clear light of each window is 1000 x 865 mm (WxH) The glass compound, moving from the exposed side, is composed of a glass pane type PYRAN S (manufacturer Schott AG – Germany), with or without deposited metallic oxides, having thickness of 6 mm, a 10 mm thick cavity and two toughened panes with or without deposited metallic oxides (manufacturer Soglass) having, each, thickness of 6 mm, fitted, in between, with a Dupont Sentryglas Interlayer having thickness of 1.52 mm. The frame and the glass retaining frame are composed, respectively, of an L shaped steel profile having thickness of 13 mm and of a stainless steel flat having width of 50 mm and thickness of 8 mm. The central transom is composed of a steel flat, 13 mm thick and having width of 80 mm welded to a steel flat having thickness of 13 mm and a glass retaining frame composed of a stainless steel flat having width of 80 mm and thickness of 8 mm. The glass retaining frames, fitted on the side exposed to the fire, are fixed to the frame and to the transom by means of stainless steel M6 screws fitted with pitch of 73 mm. Between the glass faces, the frame and the glass retaining frames, gaskets of KERAFIX FLEXLIT, 5 mm thick, are fitted. Between the glass edges and the frame, on the lower side, spacers of calcium silicate type FIRESIL are fitted. The glass panes are sealed by means of silicone type PENSIL 300. Field of application Fire resistant A-0 Class window with fire hazard on the inner side of the application.
The surfaces of this division, may be fitted with products, having low flame spread characteristics, installed as described in the relevant type approval certificate and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.Reference documents SOMEC drawing No. MU003 dated 18 March 2014 (5 sheets) approved on 25 March 2014 with endorsement No. LABS-892.Tests carried out Tests as per RINA Test Laboratory report No. 2014CS01721/1 issued on 25 March 2014 according to IMO 2010 FTP Code Part 3 Appendix 2 - A.I - Windows. |