ENGGS24/05/2010
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED064310WS/002
Certificate date 5/24/10
Type Mezzi di salvataggio
Directive 2008/67/EC
Product Launching appliances using fall (davits)
Item Nº A.1/1.21
Model SMRF21
Identification S/N: SMRF21016
Intended to Hull: YZJ2008-896
Manufacturer JIANGYIN CITY BEIHAI LSA CO., LTD.
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Place of production 33 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
Place of requester 33 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU  % CHINA
Tel. N.,Fax, Email 0086 510 86593705, 0086 510 86986869, ---
Standards MSC.81(70) and Res MSC.48(66) LSA Code,IMO Res. MSC 81(70) as amended, MSC 226(82),IMO Relolution MSC.218(82)
Surveyor Y.F.CHENG



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED064310WS/002

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/1.21
Description Launching appliances using fall (davits)
Model SMRF21
Identification S/N: SMRF21016
Intended to Hull: YZJ2008-896
Applicant JIANGYIN CITY BEIHAI LSA CO., LTD.
33 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA
Testing standards MSC.81(70) and Res MSC.48(66) LSA Code,IMO Res. MSC 81(70) as amended, MSC 226(82),IMO Relolution MSC.218(82)
    
Issued at Genoa 
on May 24, 2010

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /10
 

________________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED064310WS/002
Manufacturer:
JIANGYIN CITY BEIHAI LSA CO., LTD.
Address
33 BEIHUAN ROAD, YUECHENG TOWN, JIANGYIN CITY JIANGSU
CHINA

Verified components of the equipment (with serial number)
S/N: SMRF21016
Intended to Hull: YZJ2008-896
Technical documentation
Test report issued by RINA on 5 May 2010 ( S/N.SMRF21016) in accordance with MSC.81(70) and Res MSC.48(66) LSA Code; IMO Res. MSC 81(70) as amended, MSC 226(82); IMO Relolution MSC.218(82)

Drawing as followings: As per RINA approved drawing No. STRT-7337 dated 13 Mar. 2009:
215BH-37-00SM                           INSTRUCTION  
215BH-37-00SY                           TYPE TEST PROGRM
215BH-37-00JS                            CALCULATION OF DESIGN
JYB-00LH                                     PHYSICOCHEMICAL PROPORTIES OF MATERIAL FOR MAIN PARTS
215BH-37-00                                SMRF21 MANUAL SLEWING  RAFT DAVIT
215BH-37-01                                BASE     
215BH-37-02                                GEAR SHAFT
215BH-37-03                                SLEWING TRAY
215BH-37-04                                JIB
215BH-37-05                                BOAT FALL UNIT
215BH-37-08                                SET SQUARE
215BH-37-10-0                             LEADING BLOCK
215BH-37-10-02                           PULLEY
215BH-37-10-03                           SHAFT
215BH-37-10-04                           BUSH
215BH-30-05-0                             HOISTING DEVICE
215BH-30-05-01-0                        REDUCTION GEAR CASE SET
215BH-30-05-01-01-0                   BODY CASE
215BH-30-05-01-02                      GEAR
215BH-30-05-01-03                      HANDLE SHAFT
215BH-30-05-01-05A/B                GEAR SHAFT
215BH-30-05-01-06A/B                GEAR
215BH-30-05-01-08                      SHFAT
215BH-30-05-01-09                      GEAR SHAFT
215BH-30-05-01-12                      DRUM SHAFT





   
                                             ATTACHMENT TO
                               CERTIFICATE No. MED064310WS
  
  Maximum lowering load: 21kn
  Hoisting load: 3 kn.
  Minimum lowering load: 5.2kn
  Slewing load: 3 kn
  Winch type: D21Z
  Hoisting speed: NIL (the davit is only used for launching of life rafts).
  Lowering speed: 48 m/min
  Slewing Radius: 4.0 meter
  Steel wire dimension: 18 x 19 + FC-16mm
  Braking load of wire rope: >148 kn

Limitation on the acceptance or use of the product
Allowable working inclination: Trim: 10 deg list: 20 deg
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA - Massimo Sanquerin
RINA
**** NOTICE: This is NOT an official certificate ****