MED274624WSENGD- -  -  N- LNK-LB25, LNK-LB43 -N- S- S- -02/07/2024- Marine Equipment- - SN- S- - N-  - 1,178,895B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED274624WS- N-Jul 1, 20291178895
 
Form
  Marine Equipment(TO)
MED141924WS
Certification N. MED274624WS - (ENG)
Certificate date 02/07/2024
Type Mezzi di salvataggio
Product Lifebuoys
Item Nº MED/1.1

Model or Denomin.
Items
LNK-LB25, LNK-LB43
Applicant XIAMEN LONAKO Inc.
Place of requester Xiamen City, Fujian Province, CHINA
Tel. N.,Fax, Email 0592-5606076, ---, david@lonako.com
Directive (EU) 2023/1667
Standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference Documents SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628.
Request 2024/04/25
Expire date 01/07/2029
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED274624WS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/1.1
Description Lifebuoys
Type LNK-LB25, LNK-LB43
Applicant XIAMEN LONAKO Inc.
Xiamen City, Fujian Province, CHINA
Testing standards IMO Res. MSC.81(70), as amended, IMO Res. MSC.481(102).
Reference standards SOLAS 74 Reg. III/7, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) II, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO Res. MSC.481(102), IMO MSC.1/Circ.1628.
Issued in SHANGHAI on
This Certificate is valid until
July 2, 2024
July 1, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED274624WS
Page 1 of 3

Product Description


LNK-LB-25 and LNK-LB-43, are orange red buoyant lifebuoys provided with grab lines and reflective strips.

Main Characteristics:

Items / Type
LNK-LB-25
LNK-LB-43
Diameter
Outer Diameter
703±20 mm
740±20 mm
Inner Diameter
445±20 mm
468±20 mm
Elliptical Section
Major Axis
125±20 mm
135±20 mm
Minor Axis
109±20 mm
120±20 mm
Mass of the Lifebuoy
≥ 2.5 Kg
≥ 4.3 Kg

Materials:
- Shell, High Density Polyethylene HDPE;
- Buoyancy, Closed Foaming Material;
- Grabline, PE 10 mm in diameter.

Retro-Reflecting material fitted around the body at four evenly-spaced points.


Field of Application

The design assessment is based on International Life-Saving Appliances (LSA) Code, IMO Res. MSC.48(66) as amended by IMO Res. MSC.207(81) and IMO Res. MSC.218(82).

Maximum installation height: 100 m.

LNK-LB-25: This lifebuoy is not intended to operate the quick-release arrangement provided for the self-activated smoke signal and self-igniting lights.


LNK-LB-43: This lifebuoy is intended to operate the quick release arrangement provided for the self-activated smoke signals and self-igniting lights.





ATTACHMENT TO
CERTIFICATE No. MED274624WS
Page 2 of 3

Continued:

Remarks

The product is to be marked with name of manufacturer, type designation, date of manufacture, expiry and operational restrictions and approval information including approval information.

The product should be provided with brief instructions or diagrams clearly illustrating the use, also the manual operation, printed on the casing.

Production and installation testing shall be carried out according to IMO Res. MSC.81(70) part 2.

Retro-reflective material used have to be approved according to the Marine Equipment Directive and bear the Mark of Conformity. If the lifebuoys are fitted with position-indicating lights or lifebuoys self-activating smoke signals, these shall also be approved according to the Marine Equipment Directive and bear the Mark of Conformity.



Reference Documents

Tests are documented in accordance with the recommendation on testing of Life-Saving Appliances, IMO Res. MSC.81(70) part 1, as amended by IMO Res. MSC.200(80) and IMO Res. MSC.226(82) and IMO Res. MSC.323(89).
1. LNK-LB-25:
- Technical Drawing, approved by RINA with n° SHFP-27455.
- Technical Specification, approved by RINA with n° SHFP-27275.
- Bill of Material, approved by RINA with n° SHFP-27273.
- Mark, approved by RINA with n° SHFP-27278.
- Operation and Maintenance Instruction, filed by RINA with n° SHFP-27277.
2. LNK-LB-43:
- Technical Drawing, approved by RINA with n° SHFP-27456.
- Technical Specification, approved by RINA with n° SHFP-27275.
- Bill of Material, approved by RINA with n° SHFP-27274.
- Mark, approved by RINA with n° SHFP-27292.
- Operation and Maintenance Instruction, filed by RINA with n° SHFP-27277.

Tests Carried Out

Lifebuoys Evaluation and Test Report issued by Wuhan Testing Center of Marine Life-Saving Appliances, according to IMO Res.MSC.81(70) as amended by MSC.200(80) and MSC.226(82) as below:
1. LNK-LB-25
Evaluation and Test Report (Ref No.:2024067), and filed by RINA with n° SHFP-27284.
2. LNK-LB-43
Evaluation and Test Report (Ref No.:2024068), and filed by RINA with n° SHFP-27280.




ATTACHMENT TO
CERTIFICATE No. MED274624WS
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****