1. Product Description
VFD shipboard electric power cables with following rating:
Type | Rated Voltage (KV) | Number of Core | Conductor Cross-Section (mm2) | Max. Temp.
(°C) |
/SC,/NC,/ NSC
CJ85-VFD
CJ86-VFD
CJPJ85-VFD
CJPF86-VFD | 0.6/1.0 | 3 |
2.5 to 240 | 90 |
3 +E | 2.5 to 240 + 2.5 to 150 (E) |
3+3E | 2.5 to 240 + 1 to 50 (E) |
1.8/3.0 | 3 |
10 to 240 |
3 +E | 10 to 240 + 10 to 120 (E) |
3+3E | 10 to 240 + 4 to 50 (E) |
Note: "conductor cross-section" is selected from the following series of conductor size:1, 1.5, 2.5, 4, 6, 10, 16, 25, 35,
50, 70, 90, 120, 150, 185, 240 mrn².
+Conductor: Stranded bare or tinned annealed copper - Class 2 or 5
+Insulation: Cross-linked polyethylene -XLPE(J)
+Inner Sheath: (Option):
Halogen Free Thermoplastic compound - SHF1 (PF)
Halogen Free Thermoset compound - SHF2 (PJ)
+Armor:
8: Copper wire braided
9: Steel wire braided
+Outer Sheath:
5: Halogen Free Thermoset Compound - SHF2
6: Halogen Free Thermoplastic Compound - SHF1
+Other properties’ suffix:
C: Shipboard power cable
VFD: Variable frequency device
+Flammability Code:
SC: Halogen-free Low-smoke bunched flame retardant cable, comply with IEC 60332-3,IEC 60332-1, IEC60754, IEC61034
NC: Halogen-free Low-smoke bunched flame retardant fire resistant cable, comply with IEC 60332-3, IEC 60332-1, IEC60331, IEC 60754, IEC61034
NSC: Halogen-free Low-smoke bunched flame fire resistant cable, comply with IEC 60332-3, IEC 60332-1,IEC60331, IEC 60754, IEC 61034.
Enclosure - Page 2 of 2
CJ Series VFD Cables
2. Reference Documents:
+ Specification of marine power cables. Filed by RINA with drawing No.SHEL-11300.
+ Test Report: “Shanghai Intelligent Service and Technology Co., Ltd” Report No.:TN21-0733E, TN21-0734E. Filed by RINA with drawing No. SHEL-11304.
+ Routine test Report signed by RINA Surveyor. Filed by RINA with drawing No.SHEL-11302.
+ Asbestos-free Declaration: Filed by RINA with drawing No. SHEL-11299.
3. Notes/Remarks:
+ The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates.
+ Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria.
+ Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment. |
|