Product Description:
- Watertight hatches between 400 x 400 mm and 650 mm x 650 mm..
- See drawings approved on 02 February 2022 with nr. ISDP-27349, ISDP-27350, ISDP-27351.
- If the same construction materials, as per approved a.m. drawing, will be used, the T.A. may be considered suitable for all the dimensions that between 400 and 650 mm.
- Hatches suitable for a hydraulic pressure of 3.0 m head.
- These hatches are not to be fitted on weather decks.
- In any case upon completion of installation, doors and hatches are to be checked by a "hose test". The hose test is to be carried out at a minimum pressure in the hose of not less than 2,0 10^5 Pa and the nozzle is to be applied at a maximum distance of 1,5 m. The nozzle diameter is to be not less than 12 mm.
- In any case, any direct contact between steel and aluminium alloy is to be avoided.
- Where the hatches may be required to be used as a means of escape the securing arrangements are to be operable from both sides and in the direction of escape they are to be openable without a key. All handles on the inside are to be non removable. An escape hatch is to be readily identified and easy and safe to use, having due regard to its position.
- The T.A. is relevant only to "watertightness".
Fields of application:
- Watertight hatches