Product Description
l Series KD-12 magnetic float level switch
Models:
KD-12*H-W, KD-12*H-W-T, KD-12*V-W, KD-12*V-W-T, KD-12*H, KD-12*H-T
Operating principle:
Magnetic action between two magnets fully separated by non-magnetic diaphragm
Installation: vertical or horizontal
Application: oil and water tanks
Working temperature:120°C (max)
Working pressure: 7 Kg/ cm2
Switch rating: 250Vac , 3 A (approx.)
Mechanical protection: IP56
l KD-12 flow switches models: KD-12P, KD-12P-T
Operating principle:
Magnetic action between two magnets fully separated by non-magnetic diaphragm.
A permanent magnet is positioned within the switch body
The second permanent magnet forms part of a cup assembly which rises and falls with changing flow rate.
Actuating weight and releasing weight can be changed depending on the adjustment of balancing.
Installation: horizontal
Application: engine piston cooling oil
Working temperature: 120°C (max)
Working pressure: 19 Kg/ cm2 (max)
Switch rating: 250Vac, 5A (approx.)
Releasing weight: 25g
Actuating weight: 80g
Mechanical protection: IP56
TYPE APPROVAL CERTIFICATE
No. ELE100826PU/001
Enclosure - Page 2 of 3
l Series KD 30 magnetic float level switches: (reed relay based)
Models:
KD-30-*1A-W, KD-30-2A-W, KD-30-*3A-W, KD-30-*1A-W-T(a), KD-30-11A (b), KD-30-12A (b)
Operating principle:
The float level switch Reed relay based has a magnet built in the float and a reed switch set inside the stem.
The reed switch is turned on and off with the up-and- down liquid levels.
Application: oil and water tanks
Working temperature: 120°C (max)
Working pressure: 7 Kg/ cm2
Switch rating: 250Vac, 5A (approx.)
Mechanical protection: IP56
a) Only for model KD-30-*1A-W-T
Working pressure: 10 Kg/ cm2 (max)
Switch rating: 250Vac, 0.3 A (approx)
b) Only for models KD-30-11A and KD-30-12A:
Working pressure: 10 Kg / cm2
Switch rating: 250Vac, 3A
l Series KD-90 displacement type level switches:
Models:
KD-90-*01A-C-W, KD-90-*01C-C-W, KD-90*02A-C-W, KD-90-02C-C-W, KD-90-*03AC-C-W,
KD-90-*03CA-C-W, KD-90-*01A-C-W-T, KD-90-*01C-C-W-T, KD-90-*02A-C-W-T,
KD-90-*02C-C-W-T, KD-90-*03AC-C_W-T, KD-90-*03CA-C-W-T, KD-90CSS*W-F6(a)
Operating principle
The sensor is a displacer heavier than the liquid, which is suspended by a compression spring.
The spring assist the buoyancy force change created as the liquid rises around the suspended displacement element. A liquid level change will allow a spring movement and a corresponding magnetic movement to operate the switch.
Installation: Vertical
Application: oil and water tanks
Working temperature: 120°C
Working pressure: 10 Kg/ cm2
Switch rating: 250Vac 15A
Mechanical protection: IP56
a) Only for model KD-90CSS*-W-F6
Working pressure: 20 Kg/ cm2 (max)
Working temperature: 250°C (max)
TYPE APPROVAL CERTIFICATE
No. ELE100826PU/001
Enclosure - Page 3 of 3
Reference Documents
l Specification: Kukdong Level Catalogue document no. 051.208.1929 Drawing – KD-12 Series dated 23/10/2009
KD-LS-002, KD-LS-003, KD-LS-004, KD-LS-005, KD-LS1-0071, KAD-LS1-A033, KD-LS-007-1, KD-LS-007
Drawing – KD-30 Series KD-LS-009, KD-LS-010, KD-LS-011, KD-LS-012, KAD-LS1-A023, KAD-LS1-A028 Drawing – KD-90 Series KD-LS-021, KD-LS-022, KD-LS-023, KD-LS-024, KD-LS-025, KD-LS-026, KD-LS-027
l Test Reports: KIMM Test Report no. IM3400250 dated 14/12/1998 and No. 2000080220 dated 04/05/2000, KOMERI Test Report no. KOMERI-To-12T1632 dated 29/10/2012 (RINA Appr. no. PUEL-3242), no. KOMERI-To-11T491 dated 20/05/2011 (RINA Appr. no. PUEL-3241)
l Test for Renewal: Visual Inspection & Function Test at Kukdong Level dated 22/05/2026
l Asbestos-free Declaration: Kukdong Level document dated 12/05/2026
Note/Remark
l The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates
l Type Approval certifies that a representative sample of the product has been found to meet the applicable design criteria
l Any modification or change shall not be valid until approval is granted by RINA as a result of due assessment
l When level switches are used in a high level and overfill alarm system for cargo tanks, the wiring of the two switches are to be insulated each other
l This Type Approval certificate covers type-approved products, for which individual testing is not required.
l Validity of this Type Approval certificate is subject to the maintenance of a Production Quality Assurance certificate by RINA, covering the production of the type approved products.
Renewal/Revision
l initial certification. Certificate No. ELE160606CS/01
l 15/06/2011: renewed without design change. New certificate No. ELE156411PU/001 revokes previous certificate
l 14/12/2012: updated data for KD-90CSS*-W-F6
l 17/06/2016: renewed without design change. New certificate No. ELE111816PU/001 revokes previous certificate
l 17/06/2021: renewed without design change. New certificate No. ELE068021PU/001 revokes previous certificate
l 02/06/2026: renewed without design change. New certificate No. ELE100826PU/001 revokes previous certificate |
|