FAB061223WSENG- -  -  N- Steel wire rope with swaged ferrule termination -N- S- S- -28/02/2023- Fabbricanti Approvati- - NN- N- - S-  - 1,135,346BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB061223WS- N-Feb 27, 20281135346
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB061223WS - (ENG)
Certificate date 28/02/2023
Type Approvazione di fabbricanti di materiali
Product Cavi in acciaio

Model or Denomin.
Items
Steel wire rope with swaged ferrule termination
Applicant BSW Steel Wire Rope (Shanghai) Co., Ltd.
Place of requester Room 305, Building 1, No.526, East FuTe No.3 Road, China (Shanghai) Pilot Free Trade Zone  %  200131 Shanghai (Shanghai)  % CHINA
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Expire date 27/02/2028
Responsible Office RINA China Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB061223WS
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Steel wire ropes
Type Swaged ferrule termination for steel wire rope
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until February 27, 2028
_________________________________
RINA Services S.p.A.
Yongjun Pan
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB061223WS
Enclosure - Page 1 of 1
Steel wire rope with swaged ferrule termination

APPROVAL CONDITIONS



Swaged ferrule termination for steel wire rope:
- Steel wire rope approval range: Class 6x36WS, Dia. 9mm to 46mm, Grade up to 1960N/mm²;
- Construction standard: EN13411-3 : 2004 (E)

Note: the steel wire rope is supplied by the Approved Manufacturer.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA China Marine February 28, 2023
**** NOTICE: This is NOT an official certificate ****