DIP036318Y2!002BIL- -  -  N- Cilindri idraulici - Hydraulic cylinders -N- S- S- -20/09/2018- Diporto- - SS- N- - N-  - 1,065,656BbisDiportoNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- DIP036318Y2/002- N-1065656
 
Form
  Diporto(TO)
Certification N. DIP036318Y2/002 - (BIL)
Certificate date 20/09/2018
Product SISTEMI DI GOVERNO

Model or Denomin.
Items
Cilindri idraulici - Hydraulic cylinders
Applicant VETUS B.V.
Place of requester Fokkerstraat 571  %  3125 BD Schiedam  % NETHERLANDS
Tel. N.,Fax, Email ---, ---, SFakili@vetus.com
Directive 2013/53/EU
Standards Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
RCD II - D4 - (Modulo B - Componenti) BIL
Vuoto Querysave
CERTIFICATO DI ESAME UE DEL TIPO
EU TYPE EXAMINATION CERTIFICATEN. DIP036318Y2/002
Si certifica, in qualità di organismo notificato (n° 0474), che il seguente componente destinato ad unita' da diporto e' conforme ai requisiti essenziali di sicurezza stabiliti dalla Direttiva 2013/53/UE.
We certify, as notified body (no. 0474), that the following component is in compliance with the essential safety requirements of Directive 2013/53/EU.

Descrizione SISTEMI DI GOVERNO
Description STEERING SYSTEMS
Modello Cilindri idraulici - Hydraulic cylinders
Model Type
Richiedente
Applicant
VETUS B.V.,Fokkerstraat 571,3125 BD Schiedam,NETHERLANDS
Norme di riferimento Direttiva Europea 2013/53/UE - Norme per la Certificazione CE delle Imbarcazioni da Diporto e relativi Componenti, moto d'acqua, emissione sonore ed emissioni allo scarico dei motori di propulsione.
Reference standards European Directive 2013/53/EU - Rules for EC certification of recreational craft and their components, personal watercraft, noise emissions from recreational craft and exhaust emissions from propulsion engines.
In base all'Allegato II della Direttiva 2013/53/UE, la presente certificazione (Modulo B), unitamente all'applicazione di uno dei moduli previsti dall' Art. 20 della Direttiva, consente al Fabbricante di apporre sul prodotto sopradescritto la seguente marcatura.
On the basis of Annex II of Directive 2013/53/EU, this Certificate (Module B), in conjunction with the application of one of the modules for assessment of conformity of production stated in Art. 20 of Directive, allows the Manufacturer to affix the following marking to the product described above.
_________________________________
RINA Services S.p.A.
  
Alberto Carmagnani
Rilasciato a  Genova   il  20  Settembre  2018
   .   
Issued in Genoa on September 20, 2018
 



Questo Certificato e' composto di 1 pagina e di 1 allegato
This certificate consists of this page and 1 enclosure
Termini e condizioni di validità/Terms and validity conditions
- Il presente certificato potrà perdere validità nel caso siano apportate modifiche al prodotto rispetto alla documentazione tecnica esaminata.
- The following condition may render this certificate invalid: any technical modification to the product as regards examined technical documentation
Termini e condizioni di validità
La responsabilità del prodotto rimane del fabbricante, del suo rappresentante o, in assenza di un rappresentante, dell'importatore, in accordo con la Direttiva 2001/95/EC relativa alla Sicurezza Generale dei Prodotti. Le seguenti condizioni possono rendere non valido il presente <Computed Value>: modifiche nella realizzazione del prodotto, rispetto alla documentazione tecnica esaminata modifiche o emendamenti alla Direttiva modifiche o emendamenti negli standard che costituiscono la base per la conformità documentale con i requisiti essenziali della Direttiva.
Terms and validity conditions
The product liability rests with the manufacturer, his representative or, in the absence of a representative, the importer, in accordance with the General Product Safety Directive 2001/95/EC The following conditions may render this <Computed Value> invalid: Changes in construction of the product as regards the examined technical file Changes or amendaments to the Directive Changes or amendaments in the standards with form basis for documenting compliance with the essential requirements of the Directive.
**** NOTICE: This is NOT an official certificate ****
CERTIFICATO DI ESAME UE DEL TIPO
EU TYPE EXAMINATION CERTIFICATE
N. DIP036318Y2/002
Allegato - Pagina 1/1
Enclosure - Page 1 of 1
Cilindri idraulici - Hydraulic cylinders

Documenti di riferimento



Reference documents
Documentazione Tecnica approvata in forma completa il 20/09/2018 e depositata presso la Direzione Generale del RINA.
Rapporti di visita e job n° 1996/DG/794/DP - 2005/LI/01/1060 - 2008/CS/01/1870 e n. 2018//Y2/01/363.

Examination of technical documentation completed on 20/09/2018 and filed at RINA Head Office.
Test reports and jobs nr. 1996/DG/794/DP - 2005/LI/01/1060 - 2008/CS/01/1870 and 2018/Y2/01/363.
Materiali


Materials
Vedi disegni depositati presso la Direzione Generale del RINA.

See drawings deposited by RINA Head Office.
Condizioni di accettazione




Acceptance conditions
I sistemi di governo devono essere sistemati a bordo e marcati in accordo alla Norma EN ISO 10592 e devono essere provvisti di marcatura CE.

Steering systems are to be fitted and marked according to EN ISO 10592 and are to be provided with CE marking.
Nota: Il presente certificato aggiorna i seguenti:

- n. DIP79496DG rilasciato il 19-10-2006
- dal n. DIP106005/LI/32 al n. DIP106005/LI/35 rilasciati il 23-02-2006
- n. DIP187008CS/004 rilasciato il 06-05-2008

Note: This certificate updates the following ones:

- n. DIP79496DG issued onl 19-10-2006
- form n. DIP106005/LI/32 to n. DIP106005/LI/35 issued on 23-02-2006
- n. DIP187008CS/004 issued on 06-05-2008

Modelli

Models
MTC 30 - MTC 52 - MTC 72 - MTC 125 - MTC 175 - MTC 105 - MTC 215 - MT 225 - MT 340 - MT 450 - OB 35 - OB 85 - MT 600 - MT 900 - MT 1200 - MTC 7210 SL - OBC 150 - OBC 275
.


Genova 20  Settembre  2018 
Genoa September 20, 2018
**** NOTICE: This is NOT an official certificate ****