Product Description:
The CCM-20 module (46WCCM20, 46WCCM20_I and 46WCCM20_I_SP), is a microprocessor controller handling fuel injection, cylinder combustion control and monitoring on Wartsila engines. Power supply module is divided in two parts, isolated each other: a controller supply (24V DC) and a driver supply (24-110V DC).
CCM-20 I/O description:
Symbol | Description | Total
ch. | Typical usage on
CR engine | Typical usage on
SG /DF engine |
| SYS supply | System power supply | 2 | 2 x 24Vdc | 2 x 24Vdc |
| DRV supply | Driver power supply | 2 | 2 x 110Vdc | 2 x 24Vdc |
| CAN | CAN- communication | 2 | 2 x WE-CAN+ | 2 x WE-CAN+ |
| DI | Digital Input, Module ID | 5 | 5 x Module ID | 5 x Module ID |
| SPEED | Speed and position input | 2 | 2 x Speed / Position | 2 x Speed/ position |
| PHASE | Phase input | 2 | 2 x Phase | 2 x Phase |
| FAI | Fast analogue input | 6 | not used | 3 x Knock sensing
3 x cylinder pressure |
| SAI | Std. analogue Input | 4 | 2 x FCV position; 1 x rail pressure | not used |
| DAI | Diff. Analogue Input | 1 | Speed reference | Speed reference |
| TC | Thermocouple input | 15 | 3x exhaust gas, 4x main bearing;
6x liner; 1-2x fuel pump | 3 x exhaust gas; 4x main
bearing; 6 x liner |
| PWM | Driver output | 3-6 | 3-6 x injector solenoid | 3 x gas valve; 3 x pilot |
| HSD | High Side Driver | 2 | 2 x FCV control | not used |
| DO | Digital Output | 2 | not used | 2 x spark control |
| D I/O | Digital Input or Output | 4 | 2 x limp | 2 x limp |
Documentation:
Parker: - CCM20_03_Hardware_Description_05; 46WCCM_CPU_rev0304_Component_Assembly;
- 46WCCM_DRV_rev0304_Component_Assembly; 2272AZ_Main_Assembly_08; 2272PZ _Enclosure_07;
- Wccm20a04_0304 Schema; Wccm20b04_0304 Schema; 46WCCM20 ver 3.6 Parts list; 46WCCM20_I ver 3.6 Parts list;
- CCM-20 functional test procedure;
Wärtsilä: - CCM20 Technical Requirement Specification e-revision_2.pdf
Test Reports:
NEMKO: 125111A dated 02/04/2009; 125111B dated 20/04/2009; 150150 dated 27.05.2010
VTT: VTT-S-03493-09 dated 15/05/2009
SSG:289338-1 dated 22.09.2017; HELEM2106000271-1 dated 24.08.2021 and HELEM2110000408 dated 07.10.2021
Vansco/Parker: Type approval test plan CCM-20 V1.4 and CCM-20 additional EMC test plan 7
The CCM-20 module has been tested and fulfils the conditions mentioned in IACS UR E10, rev.7.
Remarks:
The present certificate does not include the approvals of:
a) Application Software; b) Specific functionalities related to the engine.
Following documents are to be sent for approval before of each installation on board:
- F.M.E.A document of the complete engine control system (according to the actual configuration)
- System Block diagram complete of the connections among the modules with application software revision.
This certificate replaces the previous certificate No. ELE220716XG/004.
|
|