FAB034424CFENG- -  -  N- Austenitic stainless steel RINA grade 304/304L and 316/316L or equivalent grade according to recognised standard -N- S- S- -29/07/2024- Fabbricanti Approvati- - SN- N- - S-  - 283,984BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB034424CF- N-Mar 4, 2029283984
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB034424CF - (ENG)
Certificate date 29/07/2024
Type Approvazione di fabbricanti di materiali
Product Tubi in acciaio saldati in acciaio inossidabile

Model or Denomin.
Items
Austenitic stainless steel RINA grade 304/304L and 316/316L or equivalent grade according to recognised standard
Applicant PRAKASH STEELAGE LIMITED
Place of requester 101, 1ST FLOOR, SHATRUNJAY PARTMENT, 28 SINDHI LANE, NANUBHAI DESAI ROAD  %  400004 Mumbai (Maharashtra-27)  % INDIA
Tel. N.,Fax, Email ---, ---, ---
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents RINA Rules
Expire date 04/03/2029
Responsible Office RINA India Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB034424CF
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Welded stainless steel pipes and tubes
Type Austenitic stainless steel RINA grade 304/304L and 316/316L or equivalent grade
according to recognised standard

Applicant PRAKASH STEELAGE LIMITED
101, 1ST FLOOR, SHATRUNJAY PARTMENT, 28 SINDHI LANE, NANUBHAI DESAI ROAD
400004 Mumbai (Maharashtra-27)
INDIA
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until March 4, 2029
_________________________________
RINA Services S.p.A.
Aswin Palliath
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB034424CF
Enclosure - Page 1 of 1
Austenitic stainless steel RINA grade 304/304L and 316/316L or equivalent grade according to recognised standard

APPROVAL CONDITIONS




Size range:
  • Outside diameter: Min. 8 mm- Max. 508 mm
  • Wall Thickness: Min. 0.8mm - Max. 16 mm

Manufacturing process: ERW, Electrical Resistance Welding

Heat treatment: solution annealing at min. temp. 1040 degree Celcius

Non destructive examination of welded seam: ultrasonic/radiographic/eddy current/Dye Penetrant test.

Survey conditions: the pipes are to be in compliance in all respects with the requirements specified in Part D Ch 2 Sec2 of the RINA Rules and are to be tested accordingly.

Note: The raw materials to be provided by RINA approved manufacturer.
This certificate annul and replaces Certificate No. FAB00702401







General conditions for the approval
  • The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
  • RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA India Marine July 29, 2024
**** NOTICE: This is NOT an official certificate ****