MED076623WS!001ENGD- -  -  N- PN95FA/CA -N- S- S- -03/04/2023- Marine Equipment- - NN- S- - N-  - 1,031,703B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità- MED076623WS/001- N-Apr 2, 20281031703
 
Form
  Marine Equipment(TO)
Certification N. MED076623WS/001 - (ENG)
Certificate date 03/04/2023
Type Mezzi di salvataggio
Product Lifeboats: (a) davit-launched lifeboats: partially enclosed / totally enclosed
Item Nº MED/1.17a

Model or Denomin.
Items
PN95FA/CA
Applicant Palfinger Marine Europe B.V.
Place of requester HAVENSTRAAT 18, 3115 HD SCHIEDAM, THE NETHERLANDS
Tel. N.,Fax, Email +31 88 264 0000, ---, service.netherlands@palfingermarine.com
Directive (EU) 2022/1157
Standards IMO Res.MSC.81(70) as amended, IMO MSC/Circ.1006.
Reference Documents SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630.
Request 2023/01/16
Expire date 02/04/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Hai Wen Zhang S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED076623WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2022/1157.
MED Item Nº MED/1.17a
Description Lifeboats: (a) davit-launched lifeboats: partially enclosed / totally enclosed
Type PN95FA/CA
Applicant Palfinger Marine Europe B.V.
HAVENSTRAAT 18, 3115 HD SCHIEDAM, THE NETHERLANDS
Testing standards IMO Res.MSC.81(70) as amended, IMO MSC/Circ.1006.
Reference standards SOLAS 74 Reg.III/21, SOLAS 74 Reg.III/31, SOLAS 74 Reg.III/34, IMO Res.MSC.36(63)-(1994 HSC Code) 8, IMO Res.MSC.48(66)-(LSA Code) I, IMO Res.MSC.48(66)-(LSA Code) IV, IMO Res.MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1423, IMO MSC.1/Circ.1630.
Issued in SHANGHAI on
This Certificate is valid until
April 3, 2023
April 2, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Hai Wen Zhang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED076623WS/001
Page 1 of 3

Product Description


9.50 meter Totally Enclosed Lifeboat (Type: PN95FA/CA) of G.R.P. construction and filled with polyurethane foam among seats, hulls, canopy and canopy inner module to provide buoyancy.

Main Characteristics:

Length (Excluding fender) : 9.50 meters; Breadth (Excluding fender) : 3.60 meters;


Depth : 1.25 meters; Total Height : 3.40 meters; Distance Between Hooks: 9.00 meters.

PN95CA - Dry Cargo version without water spray system and self-contained air support system;


PN95FA - Tanker version with water spray system and self-contained air support system.

Proposed Propulsion System:

1. In-board diesel engine manufacturer Zhenjiang Siyang Diesel Engine Manufacturing Co.,Ltd, Model 380J-3, Power 20.6 KW, Gear Ratio 2.74:1, Propeller Dimension D400 mm x H460 mm; or


2. In-board diesel engine manufacturer BUKH A/S, Model BUKH DV29RME, Power 21.3 KW, Gear Ratio 3.00:1, Propeller Dimension D400 mm x H350 mm; or
3. In-board diesel engine manufacturer BUKH A/S, Model BUKH DV32RME, Power 23.5kw, Gear Ratio 3.00:1, Propeller Dimension D420 mm x H390 mm.

Weight of the Lifeboat:

Type of boat
PN95CA (Cargo Version)
PN95FA (Tanker Version)
Light Weight Fully Equipped
5620 Kg
6000 Kg
With 120 persons
15520 Kg
15900 Kg

Hull Material: G.R.P.

Color: Orange Hull


G.R.P. Material:
- Gel Coat Resin: C138, manufactured by Ashland (Changzhou) Specialty Chemical Co.,Ltd.
- Polyester Resin: FL-918, manufactured by Jiangsu Full Mark Chemicals Co., Ltd.
- Chopped Strand Mats: Type: EMC300 and EMC600, manufactured by Taishan Fiber Glass INC.
- Glass Fiber Woven Roving: Type: EWR400 and EWR800, manufactured by Jiashan Glass Fiber Weaving Factory.

[Matting Description: Gelcoat+EMC300+EMC600+EWR400+EMC300+EWR800+EMC300+EWR800+EMC300].

Buoyancy material: RIGID POLYURETHANE FOAM PLASTICS manufactured by Jiangyin TongQi Allied Chemical Factory.

Righting System: Self-righting and provided with safety belt for each occupant.

Fire Protected Type (PN95FA) is provided with sprinkler system and self-contained air supply system.


ATTACHMENT TO
CERTIFICATE No. MED076623WS/001
Page 2 of 3
Continued:

Release Mechanism Device Model NPT85HKC, SWL=8.5 Tonnes per hook, Manufactured by Jiangyin Neptune Marine Appliance Co.,Ltd.

Fuel Tank Capacity for each type of engine: 220 liters.

Towing Force: 3800 N (Engine model 380J-3);


3900 N (Engine model BUKH DV29RME);
4000 N (Engine model BUKH DV32RME).

Limitations on the acceptance or use of the product:

Maximum Number of Persons: 120 (82.5 Kg/person);

Lifeboats manufactured on or after 1 January 2013 shall be equipped with release and retrieval system complying with IMO Res.MSC.320(89) and IMO Res.MSC.321(89).


Tests Carried Out

Evaluation and Test Report (Lifeboat Buoyant Material) (Ref. No.2019048) issued by Wuhan Testing Center of Marine Life-saving Appliances, and filed by RINA with No.: SHFP-23150.

Impact Test Report of 9.5m Fire Protected Totally Enclosed Lifeboat (Ref. No.: 2009Z-C061) issued by Testing and Calibration Laboratory of Vibration and Noise of SMDERI, and filed by RINA with No.: SHFP-23151.

Fire Test Report (Ref. No.: S00012019-2003) issued by CSSC Marine Auxiliary Equipment Performance and Environment Test and Inspection Center, and filed by RINA with No.: SHFP-23152.

Test Report (Ref. No.: 2010-06-300) issued by Shanghai R&D Center for Polymer Materials, and filed by RINA with No.: 23154.

Test Report of Fire-retardant Materials (Ref. No.: 2009-11-M006-2) issued by Shanghai R&D Center for Polymer Materials, and filed by RINA with No.: 23156.

Evaluation and Test Report on serial No. 955102/955103/955104/955105/955106/955107 witnessed by RINA dated on March 1~2, 2023 in accordance with IMO Res. MSC.81(70) part 1 as amended by IMO Res. MSC.226(82), IMO Res. MSC.274(85), IMO Res.MSC.321(89) and IMO MSC.323(89) etc. and LSA Code as amended by IMO Res. MSC.207(81), IMO Res.MSC.218(82), IMO Res.MSC.320(89) and IMO Res. MSC.272(85) etc., and filed by RINA with No.: SHFP-23155.


Design Assessment

The design assessment is based on IMO Res. MSC 48(66) as amended by Res.MSC.207(81), Res. MSC.218(82), Res. MSC. 272(85) and Res. MSC.320(89) etc.

Lifeboat equipment and marking/instructions to be inspected after installation onboard the ship.

Equipment shall comply with LSA Code and IMO Res.MSC.81(70) part 1 as amended by IMO Res. MSC.226(82), IMO Res. MSC.274(85), IMO MSC.321(89) and IMO MSC.323(89) etc.

Production and installation testing shall be carried out according to IMO Res. MSC. 81(70), part 2.


Reference Documents

Technical drawings and manuals approved and filed by RINA listed on Approval letter No.: SHFP/2023/244/SQN.




ATTACHMENT TO
CERTIFICATE No. MED076623WS/001
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Hai Wen Zhang
**** NOTICE: This is NOT an official certificate ****