ELE037623CS!005ENG- -  -  N- Sensor MD2207 in connection with,module MD9850 -N- S- S- -22/02/2023- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 840,487Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE037623CS/005- N-Feb 21, 2028840487
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE037623CS/005 - (ENG)
Certificate date 22/02/2023
Type Impianti di Automazione
Product Baro-Thermo-Hygrometer

Model or Denomin.
Items
Sensor MD2207 in connection with,module  MD9850
Applicant MICRODATA DUE SRL
Place of requester Via Greti Del Vara 9 , 19020 Follo, La Spezia % ITALY
Tel. N.,Fax, Email 0187-599101 d.dido@microdatasrl.it
Standards Rules for the Classification of Ships - Part C - Machinery, Systems and Fire Protection,Ch. 3,Sec. 6, Table 1
Expire date 21/02/2028
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE037623CS005
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description Baro-Thermo-Hygrometer
Type Sensor MD2207 in connection with
module  MD9850

Applicant MICRODATA DUE SRL
Via Greti Del Vara 9 , 19020 Follo, La Spezia
ITALY
Reference standards Rules for the Classification of Ships - Part C - Machinery, Systems and Fire Protection,Ch. 3,Sec. 6, Table 1
  

 
 
   .   This Certificate is valid until February 21, 2028
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE037623CS005
Enclosure - Page 1 of 1
Sensor MD2207 in connection with,module  MD9850
The Baro-Thermo-Hygrometer model MD2207 for measuring the pressure, the temperature and the Humidity (RH) of the ambient where it is installed.
The measure PCB board is enclosed in aluminum case.
MD 2207 Sensor may be installed in potentially explosive atmosphere, with the use of additional Zener Barrier, contained in Module MD9850.
Module MD9850 allows the galvanic isolation between the detection Loop and the Ex detector line.

MD2207 Mechanical protection: IP65
MD2207 Max ambient temperature Operating Condition: -20°C to +75°C
MD9850 Max ambient temperature Operating Condition: -5°C to +60°C

Sensors features:

Humidity:
Measurement range: 0 to 100% RH
Accuracy: typ. ± 3.0% RH (20 to 80% RH)

Temperature:
Measurement range: -40 to 120 °C
Accuracy: typ. ± 0.3°C (0 to 60°C)

Pressure:
Measurement range: 260 to 1260 mbar absolute
Accuracy: typ. ± 5 mbar


EU-Type Examination Certificate
Equipment or Protective System intended for use in potentially explosive atmospheres - Directive 2014/34/EU

EU-Type Examination Certificate:
IMQ 16ATEX 003X (2017-01-24)
Product: Baro-Thermo_Igrometer type MD2207
Marking:
II 2 G Ex ia IIC T5 Gb
II 2 D Ex ia IIIC T100°C Db
Safety Standard:
EN 60079-0:2012+A11:2013; EN 60079-11:2012

General remarks:
Condition of installation to be in accordance with IMQ 16ATEX 003X Eu-type Examination Certificate Requirments.

Technical description:
Microdata Due doc n.D35514 rev.A
Microdata Due doc n.D29010 rev B

Test Report:
Microdata Due doc. IS37739 rev.0 (2017/06/01)
TesLab doc. 17165F (2017/08/23)
TesLab doc. 17B302E-c (2018/01/12)


Genoa February 22, 2023
**** NOTICE: This is NOT an official certificate ****