Product description:
The I/O module IOM-20 is designed to manage measurements and control on Wärtsilä 4-stroke engines. The I/O module is a part of the UNIC2 engine automation control system.
The modules COM-10 and CCM-30 are parts of the UNIC 2 engine automation control system.
Main characteristics:
Operating ambient temperature: -25° C ... +85° C
Power supply (redundant): 24 V DC
Degree of protection: IP20
Inputs and Outputs:
| Channels |
IOM-20 | COM-10 | CCM-30 |
Fast Digital Inputs (FDI) | 2 | 4 | 5 |
Analog Inputs (AI) | 3 | 2 | 5 |
Analog Digital Input Output (ADIO) | 16 | 4 | X |
Identification Input (ID) | 5 | X | 5 |
High Side Drive (HSD) | 6 | X | X |
Analog Output (AO) | 2 | 1 | X |
Digital Input (DI) | X | 5 | X |
Digital Output (DO) | X | 1 | X |
Fast Digital Output (FDO) | X | 1 | X |
Fast Analog Input (FAI) | X | X | 4 |
Piezo Input (Piezo) | X | X | 4 |
Temperature Input (Temp) | X | X | 12 |
Driver Output | X | X | 14 |
Documents:
Circuit Diagram: EDD6844150021R03;
Data Sheet IOM-20: DBAE633385_ R03;
Circuit Diagram: sch6844180024r02
Data Sheet CCM-30: DBAC978340 rev A
Circuit Diagram: sch6844180022r03
Data Sheet COM-10: DBAC983249 rev A
Release Notes: RND6844150030R26 dated 18/11/2018 ;
Specification: SPD6844150001R13 dated 26/10/2018;
Circuit Diagram: sch6844180025R02;
Circuit Diagram: sch6844180023R02
TYPE APPROVAL CERTIFICATE
No. ELE341126XG
Enclosure - Page 2 of 2
IOM-20, COM-10, CCM30
Test reports:
Dekra: 2231950.0501-EMC dated 10/12/2018; 2231950.51 dated 21/12/2018;
Sebert Trillingstechniek B.V.: M18.004-P18.006 rev.01 dated 18/12/2018;
SGS: EMC, 278656-1 dated 04/01/2016
SGS: 278653-2 dated 05/08/2015
SGS: 278653-1 dated 05/19/2015
VTT: VTT-S-02171-16 dated 24/05/2016
VTT: VTT-S-02171-16 dated 24/05/2016
Dekra: 2237435.01 dated 17/07/2019
SGS: 278656-2, dated 06/08/2015
BICON: PRO-20201110-D1-01-SE dated 03/02/2021
BICON: PRO_20201110-D1-02-SE dated 03/02/2021
BICON: PRO_20201110-D1-03-SE dated 03/02/2021
Remarks:
- Each particular application and installation is to be approve.
- Installation and use are to be in accordance with manufacturer's instructions.
- Performance integration, fault simulation, final factory acceptance tests, on-board and integration tests are to be witnessed by a Surveyor.