ENGGN18/06/2015
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED198915CS
Certificate date 6/18/15
Type Prevenzione dell'inquinamento marino
Directive 2013/52/EU
Product Sistemi di trattamento dei gas di scarico a bordo
Item Nº A.1/2.10
Model ECO-DeSOx
Identification 14-013-APC-0100
Intend for ship COSTA DIADEMA
Applicant CARNIVAL CORP.
Place of requester 3655 NW 87 AVENUE MSOP 301N MIAMI - FL 33178-2428  % U.S.A.
Tel. N.,Fax, Email 001 305 5992600, 001 305 5994670, ---
Standards IMO Res. MEPC.184(59)
Responsible Office GENOVA



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED198915CS

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/2.10
Description On board exhaust gas cleaning systems
Model ECO-DeSOx
Identification 14-013-APC-0100
Intend for ship COSTA DIADEMA
Applicant CARNIVAL CORP.
3655 NW 87 AVENUE MSOP 301N MIAMI - FL 33178-2428
U.S.A.
Testing standards IMO Res. MEPC.184(59)
    
Issued at Genoa 
on June 18, 2015

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /15
 

________________________________________
RINA Services S.p.A. - Luca Varini
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED198915CS
Place of unit verification
Genova,,

Verified components of the equipment (with serial number)
14-013-APC-0100
Intend for ship COSTA DIADEMA
Technical documentation
PRMT-11554 approved on 17th June  2015 : “Project DIADEMA Ship 14-013 - P&ID DeSOx SCRUBBER” - 14-013-APCW-0001-R11-PID
PRMT-11568 approved on 17th June 2015 : “DIADEMA CDF FILTER P&ID DG#6” - 14-085-APCW-0010-R00-P&ID-CDFFILTER
PRMT-11564 approved on 17th June  2015 : “Exhaust Gas Cleaning System – Onboard Monitoring Manual” –  14-013-APC-OMM Rev. 10th June 201
PRMT-10565 approved on 17th June  2015 : “Exhaust Gas Cleaning System – Technical Manual – Scheme B” – 14-013-APC-ETM-B Rev.10th June 2015
PRMT-10888 approved on 29th December 2014 : “SOx Emissions Compliance Plan” – 14-028-APC-SECP

- - - - - - - - - - - - -

ECG System ECO-DeSOx consisting of the following verified components:

EGC tower (ECOSPRAY TECHNOLOGIES / ECO-DeSOx / 14-013-APC-0100)
Sprayer nozzles (PNR / AAU2780L61 / AAU3194N6SG)
SW Pump (POMPE GARBARINO / MU200-315L / SN 724334)
SW Pump Motor (ABB / M3BP 315LKB4 / SN 3G1F1408199847)
Dilution Pump (POMPE GARBARINO / MU250-250LDS / SN 724336)
Dilution Pump Motor (ABB / M3BP 280SMB6L / SN 3G1F1408199846)
Automatic Self-Cleaning SW Filter (Filtrex / ACB-955-300 / SN 17594)
Static Mixer (ECOSPRAY TECHNOLOGIES / SM01-300)
PAH Sensors (Hach Lange / FP 360 sc)
pH Sensors (Hach Lange / pHD sc Digital Differential pH)
Turbidity Sensors (Hach Lange / Ultraturb sc)
Free O2 Sensor (Hach Lange /  LDO Sensor)
Conductivity Sensor (Hach Lange / 3700 sc)
Gas Analyzer (Vimex / ShipCEMS)
SW Pump Inverter (Danfoss / FC-102N200T7E54H2TGR3/134L5631-000906H224)
Dilution Pump Inverter (Danfoss / FC- 102P55KT7P55H5TGC1/134L5629011004G184)
PLC Panel (ECOSPRAY TECHNOLOGIES / PLC Panel)
Electrical Banel Bottom (ECOSPRAY TECHNOLOGIES / Electrical Panel ECO-DeSOx Tower Bottom)
Electrical Banel Top (ECOSPRAY TECHNOLOGIES / Electrical Panel ECO-DeSOx Tower Top)
VDU Touchscreen 10” (SIEMENS / 6AV6643-0CD01-1AX1)
Exhaust Gas extraction fan (Heavy Duty fans / MPB2/36M)
Fan Motor (ABB / M3BP 315LKB4 / SN 3G1F1414207988)
Fan Motor Inverter (Danfoss / FC-102N200T7E54H2TGR3/134L5631-000806H214)
- - - - - - - - - -
Tests carried out:

EGCS Statutory Survey Report, doc. No. 2015CS011871.
RINA job. ID. RS/2015/CS/01/1871, RS/2015/CS/01/400, RS/2015/CS/01/1989, RS/2014/CS/01/3790 and RS/2014/CS/01/3593

Limitation on the acceptance or use of the product
In scheme B, according to MEPC.184(59), compliance with emission requirements is demonstrated by continuous exhaust gas monitoring. EGCS acceptance and use to be within the terms and conditions of “Procedure for Compliance” at Para. 6 of PRMT-10888 approved on 29th December 2014 : “SOx Emissions Compliance Plan” – 14-013-APC-SECP. Monitoring system is subject to periodic surveys by RINA according to MEPC.184(59).
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Luca Varini
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****