MED097225CS!001ENGD- -  -  N- PORT-TECH -N- S- S- -06/03/2025- Marine Equipment- - SN- S- - N-  - 1,152,230B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED097225CS/001- N-Mar 5, 20301152230
 
Form
  Marine Equipment(TO)
Certification N. MED097225CS/001 - (ENG)
Certificate date 06/03/2025
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model or Denomin.
Items
PORT-TECH
Applicant MBM GROUP S.R.L.
Place of requester Via Rovereto 4  %  31010 Mareno Di Piave (TV)  % ITALY
Tel. N.,Fax, Email 0422881716; cristiano.dantoni@mbmgroup.it
Directive (EU) 2024/1975
Standards IMO MSC.1/Circ. 1319,IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Request 15/02/2022
Expire date 05/03/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED097225CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2024/1975.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORT-TECH
Applicant MBM GROUP S.R.L.
Via Rovereto 4,31010 Mareno Di Piave (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg.II-2/9, IMO MSC.1/Circ.1511
Issued in Genoa on
This Certificate is valid until
March 6, 2025
March 5, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED097225CS/001
Page 1 of 2

Product description


Single leaf hinged door whose maximum clear opening size is 700 (W) x 1830 (H) mm. The door leaf, having maximum dimensions of 750 (W) x 1880 (H) mm, is composed of two steel sheets 0.7 mm thick and, in between, one mineral wool layer having thickness of 30 mm and density of 150 kg/m3. The mineral wool is glued to the steel sheets by means of 250 gr/m2 of adhesive named ISOCOLL 8810 FLR or DUNAPOL AD 1670. The leaf is fitted with a lock, that acts on three points, actuated by a key. The door frame is composed of an "S" shaped steel profile, 1.2 mm thick, screwed to the bulkhead.

The Door may also be produced by:
MBM GROUP SRL Via Rovereto, 4 31010 Mareno di Piave (TV)
Field of application
Fire resistant B-15 Class door in compliance with IMO MSC.1/Circ. 1319 dated 11 June 2009. In this case the dimensions relevant to the height and width of the door may be increased of 15% provided that the surface area is not increased of more than 10%.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- maximum door size tested
- door used with a fire tested frame design
Reference documents

Mbm drawings No. 2010/PORT-TECH rev. 2 dated 6 March 2020 approved on 17 April 2020 with endorsement No. LABS-2023.
Tests carried out

Tests as per RINA Test Laboratory report No. 2010CS01632 issued on 8 March 2010 according to IMO Res. A.754(18) and IMO MSC.1/Circ. 1319 dated 11 June 2009.




ATTACHMENT TO
CERTIFICATE No. MED097225CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****