ELE425325CS!003ENG- -  -  N- LKSM-VFD 1,8/3 kV,LKSM-VFD-SHF2 1,8/3 kV. -N- S- S- -15/09/2025- Prodotti Elettrici- - SN- N- Luigi Benedetti- N-  - 353,343Luigi BenedettiBbisProdotti ElettriciNumero Pratica,NumDich,Norma,NumBusta,Richiesta,Validità- ELE425325CS/003- N-Sep 15, 2030353343
 
Form
  Prodotti Elettrici(TO)
Certification N. ELE425325CS/003 - (ENG)
Certificate date 15/09/2025
Type Impianti Elettrici
Product CAVI ELETTRICI

Model or Denomin.
Items
LKSM-VFD 1,8/3 kV,LKSM-VFD-SHF2 1,8/3 kV.
Applicant HELMACAB OY
Place of requester LAKIMIEHENKATU 4  %  20780 Kaarina  % FINLAND
Tel. N.,Fax, Email +358 2 4108700 dan.kurman@helmacab.com
Standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
Expire date 15/09/2030
Head Office Genova
Interrut.senza Dettaglio ENG
Vuoto Querysave
S
TYPE APPROVAL CERTIFICATE
No. ELE425325CS/003
This is to certify that the product below is found to be in compliance with the applicable requirement of the RINA type approval system.

Description ELECTRIC CABLES
Type LKSM-VFD 1,8/3 kV; LKSM-VFD-SHF2 1,8/3 kV.
Applicant HELMACAB OY
LAKIMIEHENKATU 4
20780 Kaarina
FINLAND
Reference standards RINA Rules for the Classification of Ships Pt C, Ch 2, Sec 9,IEC Standards (see Enclosure)
  

 
 
   .   This Certificate is valid until September 15, 2030
_________________________________
RINA Services S.p.A.
Luigi Benedetti
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

TYPE APPROVAL CERTIFICATE
No. ELE425325CS/003
Enclosure - Page 1 of 1
LKSM-VFD 1,8/3 kV,LKSM-VFD-SHF2 1,8/3 kV.
Materials/Components:
Shipboard power and control screened cables, flame retardant, low smoke emission, halogen free, design to meet requirements for Variable Frequency Drivers (VFD). Suitable for voltage peaks up to 3kV (for cables>10mm2)
Type: LKSM-VFD and LKSM-VFD-SHF2 (rated voltage1,8/3 kV)

Marking:
For conductor size 10-300mm2: "lot number" Cable type n x s mm2 1,8/3 kV 90°c IEC 60092-353 IEC 60332-3-22 HELMACAB "month-year" "lenght marking"
For cables with additional PE outconductors: "lot number" Cable type n x s mm2 + 3x "PE conductor size" mm2 1,8/3 kV 90°c IEC 60092-353 IEC 60332-3-22 HELMACAB "month-year" "lenght marking"
Note:
  • cables with class 5 conductor shall be marked on the sheath with "cl.5"
  • cables with tinned conductor shall be marked on the sheath with "CuSn"
  • cable with SHF2 outer sheath is cable type LKSM-VFD-SHF2

Construction:
conductor: stranded plain or tinned copper (according to IEC 60228 class 2 or class 5)
insulation: XLPE
stranding: cores stranded together and covered by wrapped tape
armour: braided armour of plain or tinned copper wires.Copper tape under the braid
sheath: SHF1 or SHF2

In accordance to IEC 60228 cl.2 and cl.5; IEC 60092-350; IEC 60092-353; IEC 60092-360 , IEC 60754-1; IEC 61034-1; IEC 61034-2; IEC 60332-1-2; IEC 60332-3-22; IEC 61196-1;RINA Rules; RINAMIL Rules; RINA Rules for FSRU; RINAMIL for FREMM; RINA Rules for FPV.

Maximum conductor temperature: 90°C

Technical Specification: HELMACAB SPECIFICATION HBKQ 9 Spec. 61/111 11.11.2024/dk
Measurement of transfer impedance according to IEC 61196-1: Test Report DELTA N. DANAK-19J1956 DELTA-N312513, rev.1.

NOTE/Remarks:
The product is subject to the compliance with RINA Rules and Standards mentioned on the certificates
Type Approval certifies that a reppresentative sample of the products has been found to meet the applicable design criteria
Any modification of change shall not be valid until approval is granted by RINA as a result of due assessment.

Other Place of Manufacturing:

a) HELMACAB (SHANGHAI) Co., Ltd.
Plot 1-2 Minghang Export Processing Zone, Shanghai, 201401 P.R.C.

b) HELMACAB Oy, Lasitehtaankatu 12, FI-10960 Hanko, Finland.

Genova September 15, 2025
**** NOTICE: This is NOT an official certificate ****