MED722126WS!011ENG- -  -  N- YYDCT -N- S- S- -24/08/2026- Marine Equipment- - SN- S- - N-  - 64,847B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED722126WS/011- N-Nov 29, 202864847
 
Form
  Marine Equipment(TO)
Certification N. MED722126WS/011 - (ENG)
Certificate date 24/08/2026
Type Mezzi di salvataggio
Product Embarkation ladders
Item Nº MED/1.29
USCG Category N° 160.117

Model or Denomin.
Items
YYDCT
Applicant JIANGSU DINGXIANG MARINE EQUIPMENT CO., LTD.
Place of requester NO.77 XINJIAO ROAD, XINJIE TOWN % DONGTAI CITY, JIANGSU PROVINCE % CHINA
Tel. N.,Fax, Email 13801416458, 0515 85751100, info@believe2008.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended, ISO 5489:2024.
Reference Documents SOLAS 74 Reg. III/11, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code), IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285, IMO MSC.1/Circ.1630 Rev 2.
Request     
Expire date 29/11/2028
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Zhi Yuan Tan S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED722126WS/011

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.29
USCG Category Nº 160.117
Description Embarkation ladders
Type YYDCT
Applicant JIANGSU DINGXIANG MARINE EQUIPMENT CO., LTD.
NO.77 XINJIAO ROAD, XINJIE TOWN,DONGTAI CITY, JIANGSU PROVINCE,CHINA
Testing standards IMO Res. MSC.81(70), as amended, ISO 5489:2024.
Reference standards SOLAS 74 Reg. III/11, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code), IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code), IMO MSC.1/Circ.1285, IMO MSC.1/Circ.1630 Rev 2.
Issued in SHANGHAI on
This Certificate is valid until
August 24, 2026
November 29, 2028
This Certificate consists of this sheet plus an attachment

________________________________________
Peng Fang
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED722126WS/011
Page 1 of 2

Product Description


- The embarkation ladder is assemblies with side rope on each side continuous from the top of the ladder to the bottom (manila or sisal rope meeting ISO 1181:2004).
- Each step is supported by each side rope.
- Steps:
The four lowest steps are made of rubber material. LXBXH (525X115X30 or 532X115 X30 at thinnest point) mm.
The remaining steps are made of hard wood. LX BXH (525X115 X25 or 532X115X25 at thinnest point) mm.
- Each side rope has a breaking strength of at least 24 kN.
- Length of ladder: 2~80 m.

Reference Documents

Technical Document and Report approved and filed by RINA listed on Approval drawings.
- No. SHST-8194 & SHFP-34407 Embarkation Ladder
- No. SHST-8195 Calculation Booklet
- No. SHST-47579 & SHFP-34408 Marking
- No. SHFP-34410 User Manual
- No. SHFP-34409 Technical Standard 
- No. SHFP-34366 Component List
Tests Carried Out

Embarkation ladder has been tested in compliance with ISO 5489:2024, and test reports are filed by RINA with No.: SHST-47419 and SHFP-34321.

Remarks

- Each ladder is to be marked in compliance with ISO 5489:2024, Clause 8.
- Each replacement step is to be marked in compliance with ISO 5489:2024, Clause 8.

Note

This certificate annuls and replaces the certificate No. MED659725WS/001 due to Change EU Authorised Representative.




ATTACHMENT TO
CERTIFICATE No. MED722126WS/011
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Peng Fang
**** NOTICE: This is NOT an official certificate ****