FAB084124PUENG- -  -  N- Grey iron castings and CV5 intended for cylinder liner of diesel engine -N- S- S- -07/08/2024- Fabbricanti Approvati- - NN- N- - S-  - 1,014,360BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB084124PU- N-Feb 22, 20281014360
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB084124PU - (ENG)
Certificate date 07/08/2024
Type Approvazione di fabbricanti di materiali
Product Fusi in ghisa

Model or Denomin.
Items
Grey iron castings and CV5 intended for cylinder liner of diesel engine
Applicant TOA KOKI CO., LTD.
Place of requester 1430-30 OAZA YAMAURA KASHIMA, SAGA PREFECTURE  % JAPAN
Tel. N.,Fax, Email +81 954 62 3019, +81 954 62 3019, ---
Standards RINA Rules for the approval of manufacturers of materials
Reference Documents Refer to attachment
Expire date 22/02/2028
Head Office RINA Korea Marine
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB084124PU
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Iron castings
Type Grey iron castings and CV5 intended for cylinder liner of diesel engine
Reference standards RINA Rules for the approval of manufacturers of materials
Reference documents Refer to attachment
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until February 22, 2028
_________________________________
RINA Services S.p.A.
Sang Seok Lee
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB084124PU
Enclosure - Page 1 of 1
Grey iron castings and CV5 intended for cylinder liner of diesel engine

APPROVAL CONDITIONS


Iron type: Grey cast iron
CV5 (Compact Graphite Iron - CGI)

Products max. weight: 15,000 kg

The chemical composition and the mechanical properties are to be in accordance with the RINA requirements or equivalent recognized standards.
Chemical composition and Mechanical properties for CV5 are to be in accordance with the manufacturer's specifications as shown in the tables below.

Table 1 - Chemical composition (%) for CV5
Limit
C
Si
Mn
P
S
Cr
Mo
Ni
Cu
V
Mg
Sn
Min.
3.70
1.30
0.45
-
-
0.15
0.20
0.20
1.60
-
0.004
0.02
Max.
4.10
1.70
0.80
0.15
0.02
0.25
0.30
0.30
2.00
0.08
0.014
0.06
Table 2 - Mechanical properties for CV5
Dimension (mm)
Temperature
Tensile strength (N/mm²)
Elogation (%)
Hardness (HBW)
< 600
20 ºC
340 min.
0.40 min.
200 min.
>= 600
20 ºC
310 min.
0.35 min.
200 min.
*Test standard ISO 6892 for Tensile test and ISO 6506-1 for Hardness test
**Reference documents for CV5: MAN-ES specifications Q.C. 0743844-4 & Q.S. 0743845-6

Survey conditions: all casting to be used for construction of ships and machinery classed with RINA shall meet
the requirements of the RINA Rules and shall be tested accordingly.

Remarks: This certificate annuls and replaces the certificate no. FAB014123PU.

General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

RINA Korea Marine 
August 8, 2024
**** NOTICE: This is NOT an official certificate ****