MED564925CSENG- -  -  N- PORTA INCERNIERATA A DOPPIA ANTA CLASSE A -N- S- S- -02/09/2026- Marine Equipment- - SN- S- - N-  - 597,421B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED564925CS- N-Sep 1, 2031597421
 
Form
  Marine Equipment(TO)
Certification N. MED564925CS - (ENG)
Certificate date 02/09/2026
Type Protezione antincendio
Product Porte tagliafuoco
Item Nº MED/3.16
USCG Category N° 164.136

Model
Items/Sizes
PORTA INCERNIERATA A DOPPIA ANTA CLASSE A
Applicant BLU BUD SRL
Place of requester VIA CORSICA 21/20  %  16128 Genova (GE)  % ITALY
Tel. N.,Fax, Email 0108601379, 0108183053, info@blubud.it
Directive (EU) 2026/1434
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference Documents IMO MSC.1/Circ. 1511/Rev.1,SOLAS 74 Reg. II-2/9
Validity 01/09/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED564925CS

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2026/1434.
MED Item Nº MED/3.16
USCG Category Nº 164.136
Description Fire doors
Type PORTA INCERNIERATA A DOPPIA ANTA CLASSE A
Applicant BLU BUD SRL
VIA CORSICA 21/20,16128 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.,IMO MSC.1/Circ.1319
Reference standards IMO MSC.1/Circ. 1511/Rev.1; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
September 2, 2026
September 1, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED564925CS
Page 1 of 2

Product description



Double-leaf door installed in an A-60 steel bulkhead in accordance with the FTP Code 2010.
Bulkhead cut-out dimensions: max. 2366 mm × 2303 mm, max. clear opening dimensions: 2200 mm × 2200 mm, and door leaf dimensions: max. 1117 mm × 2213 mm; thickness 72 mm .
The subframe on three sides consists of a 60 mm × 60 mm × 5 mm L-shaped steel profile, fixed to the smooth side of the bulkhead by means of M8 steel bolts at 150 mm centres. The subframe is in turn bolted to the formed frame, measuring 28 mm × 91 mm × 42 mm × 3 mm, using M8 steel bolts at 150 mm centres. An intumescent strip of Forster 948000, measuring 24.5 mm × 1.5 mm, is installed between the frame and the subframe. The frame incorporates the door stop and the housing for the GMP837 silicone gasket.
Starting from the fire-exposed side, the door leaves are composed of a 1.5 mm steel sheet with folded edges, Extrabond No Fire adhesive, 300 g/m², a Promat Pluratech Marine Plus board, density 860 kg/m³, thickness 19 mm, a Rockwool SeaRox SL440 mineral wool board, density 150 kg/m³, thickness 40 mm, both certified as non combustible, and a 1.5 mm steel sheet with C-shaped profile. The assembly is enclosed by perimeter C-shaped steel profiles measuring 37 mm × 72 mm × 32 mm for the leaf fitted with the hatch. The leaf without the hatch is enclosed on the lock side by an H-shaped profile, riveted in two rows with spacing varying from 340 mm to 410 mm. On the outside of the C-profile, along the top edge, the lock side edge, and for 63 mm on the hinge side edge, a layer of Forster 948000 intumescent material, 24.5 mm × 1.5 mm, is applied.
The meeting stile between the two leaves is formed by a full-height profile attached to both leaves.
The leaves are fitted with concealed door closers.
One of the leaves is fitted with top and bottom flush bolts, maintained in the closed position.
Each leaf is fitted with two concealed hinges, positioned 125 mm from the top and bottom edges.
The left-hand leaf incorporates an hose port measuring 209 mm × 183 mm × 60 mm, consisting of two C-shaped steel profiles enclosing, starting from the fire-exposed side, a layer of Promat Promasil 1000P, density 300 kg/m³, thickness 54 mm, and a layer of Promat Promatect H, density 870 kg/m³, thickness 6 mm both certified as non combustible. The hose port is hinged to the door leaf.
Field of application
Fire resistant A-60 Class double leaf hinged door with fire hazard on the side opposite to the opening.
In case of doors in compliance to the "Agreement between the EEA EFTA States and the United States of America", the present certificate is valid at the following conditions:
- doors without windows;
- maximum door size tested;
- door used with a fire tested frame design.

Reference documents
BLU BUD drawing No. A60DHB2Y Rev.0 dated 18/03/2026 enclosed on Test Report No. 2025CS015640/1 issued on 14 July 2026.
Tests carried out
Test as per RINA Test Laboratory report No. 2025CS015640/1 issued on 14 July 2026 according to Appendix 1 of IMO 2010 FTPC Part 3.




ATTACHMENT TO
CERTIFICATE No. MED564925CS
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****