MED511525CS!017ENG- -  -  N- B0 GRP WALL WET UNIT WITH RESTORING BOXES -N- S- S- -09/02/2026- Marine Equipment- - SN- S- - N-  - 2,370,495B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/017- N-Dec 1, 20302370495
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/017 - (ENG)
Certificate date 09/02/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.108

Model or Denomin.
Items
B0 GRP WALL WET UNIT WITH RESTORING BOXES
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO Circ. MSC 1120,IMO Circ. MSC.1 1581
Expire date 01/12/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/017

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.108
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type B0 GRP WALL WET UNIT WITH RESTORING BOXES
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; SOLAS 74 Reg. II-2/9; IMO Circ. MSC 1120; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
February 9, 2026
December 1, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/017
Page 1 of 2

Product description

B0 bulkhead Certified No. MED511525CS/014, equipped with following restoring boxes:

· Steel box having dimensions 304x300x100 mm and thickness 1.5 mm, placed at 1540 mm from the bottom of the bulkhead, fixed on the 4 bended sides by No. 10 steel self-drilling screws on a steel plate 540 x 460 mm thickness 1 mm with a central opening of 300x300 mm, screwed by No. 8 self-drilling screws on 2 “S” steel profile placed on the upper and lower edge and welded on the vertical stiffeners of the bulkhead;

· Steel box having dimensions 335x628x125 mm thickness 1.5 mm, placed at 250 mm from the bottom of the bulkhead. The box is vertically connected by 3 self-drilling screw per side on the vertical stiffeners “Ω” profile, thickness 2 mm, having the same height of the bulkhead. The bottom side of the box is connected to the mineral wool bulkhead by No. 3 self-drilling screws. On the upper side the box is connected to an “S” steel profile having thickness 1.5 mm by No. 3 steel self-drilling screws. The box is closed by a steel cover having dimension 343x636 mm
Field of application

Fire resisting B-0 Class bulkhead, for general applications, fitted with accessories.
Reference documents
Marine Interiors Cabins drawings No. +24PC00497 rev. 02 and +24PC00498 rev. 02 dated 04/09/2024.
Tests carried out
Tests as per RINA Test Laboratory reports No. 2024CS012569/7 issued on 25 November 2024 and No
2024CS012569/10 issued on the 05 December 2024 according to IMO 2010 FTP Code Part 3.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/017
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****