FAB061024XF!001ENG- -  -  N- Armour Steel type Ramor 400, Ramor 450, Ramor 500, Raex 400, Raex 450, Raex 500 -N- S- S- -19/08/2024- Fabbricanti Approvati- - NN- N- - S-  - 525,449BbisFabbricanti ApprovatiNumero Pratica,NumDich,Norma,Schema,Richiesta,Validità- FAB061024XF/001- N-Sep 3, 2029525449
 
Form
  Fabbricanti Approvati(TO)
Certification N. FAB061024XF/001 - (ENG)
Certificate date 19/08/2024
Type Approvazione di fabbricanti di materiali
Product Hot Rolled Steel Plates

Model or Denomin.
Items
Armour Steel type Ramor 400, Ramor 450, Ramor 500, Raex 400, Raex 450, Raex 500
Applicant SSAB EUROPE OY
Place of requester P.O. BOX 93  %  92101 Raahe  % FINLAND
Tel. N.,Fax, Email +358 20 5922517, +358 20 5922736, lassi.myllykoski@ssab.com
Standards RINA Rules for the approval of manufacturers of materials
Expire date 03/09/2029
Responsible Office HELSINKI
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS ENG
Vuoto Querysave
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB061024XF/001
This is to certify that the manufacture of  the  product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval  of Manufacturers of Materials.                                                                          

Description Hot Rolled Steel Plates
Type Armour Steel type Ramor 400, Ramor 450, Ramor 500, Raex 400, Raex 450, Raex 500
Reference standards RINA Rules for the approval of manufacturers of materials
  

 
 
 

                                                                                                                       
   .   This Certificate is valid until September 3, 2029
_________________________________
RINA Services S.p.A.
Alexander Yakovishin
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****

CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No. FAB061024XF/001
Enclosure - Page 1 of 1
Armour Steel type Ramor 400-Ramor 450-Ramor 500-Raex 400-RAEX 450-RAEX 500

APPROVAL CONDITIONS


Product : Armour steel hot rolled heavy plates and cut lengths (sheets)

Dimensions:
Heavy plates RAMOR 400, RAMOR 500 -5,0-30,0 mm;
RAMOR 450 - 5,0-18,0mm;
RAEX 400,450 and 500 - 5,0-52,0mm.
Cut lengths with mill edges 3,0-6,5 mm

Steel making process : Basic oxigen converter, continuous casting with a novel direct quenching process.

Supplied condition : Quenched







General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.

HELSINKI August 20, 2024
**** NOTICE: This is NOT an official certificate ****