MED238125WS!001ENGB- -  -  N- PN25DRC -N- S- S- -27/11/2025- Marine Equipment- - SN- S- - N-  - 1,057,144B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED238125WS/001- N-Nov 26, 20301057144
 
Form
  Marine Equipment(TO)
MED238125WS/001
Certification N. MED238125WS/001 - (ENG)
Certificate date 27/11/2025
Type Mezzi di salvataggio
Product Launching appliances using falls (davits)
Item Nº MED/1.21

Model or Denomin.
Items
PN25DRC
Applicant Palfinger Neptune Marine Equipment Technology (Shanghai) Co., Ltd
Place of requester (JIANGYIN Office)7th Floor, No.25 Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, China
Tel. N.,Fax, Email 0510-68157723, ---, z.zhao@palfingerneptune.com
Directive (EU) 2025/1533
Standards IMO Res. MSC.81(70), as amended.
Reference Documents SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Expire date 26/11/2030
Head Office SHANGHAI
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Bunan Xu S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED238125WS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Life-Saving appliances requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/1.21
Description Launching appliances using falls (davits)
Type PN25DRC
Applicant Palfinger Neptune Marine Equipment Technology (Shanghai) Co., Ltd
(JIANGYIN Office)7th Floor, No.25 Beihuan Road, Yuecheng Town, Jiangyin City, Jiangsu Province, China
Testing standards IMO Res. MSC.81(70), as amended.
Reference standards SOLAS 74 Reg.III/4, SOLAS 74 Reg.X/3, SOLAS 74 Reg. III/23, SOLAS 74 Reg. III/33, SOLAS 74 Reg. III/34, IMO Res. MSC.36(63)-(1994 HSC Code) 8, IMO Res. MSC.48(66)-(LSA Code) I, IMO Res. MSC.48(66)-(LSA Code) VI, IMO Res. MSC.97(73)-(2000 HSC Code) 8, IMO MSC.1/Circ.1632.
Issued in SHANGHAI on
This Certificate is valid until
November 27, 2025
November 26, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Bunan Xu
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED238125WS/001
Page 1 of 2

TECHNICAL DATA


Product Description:
- Maximum Working Load: 25 kN
- Minimum Lowering Load: 10 kN
- Maximum Hoisting Load: 25 kN
- Arrangement/positioning of launching appliance on board of the ship shall be in compliance with SOLAS '74 (as amended) Chapter III and LSA Code (as amended).

REFERENCE DOCUMENTS

Technical Document and Report approved and filed by RINA listed on Approval drawings and letter No. SHST-56168 PN25DRC Hydraulic Slewing Rescue Boat & Liferaft Davit (SHST/2025/588/LEIGU)/SHST-60981 PN25DRC Davit Test Report (SHST/2025/2142/LEIGU) / SHST-56167 Application Form, SHST-56166 Risk Assessment, SHST-60980 Declaration of Conformity and Asbestos Free.

TESTS CARRIED OUT

In accordance with IMO Resolution MSC.81(70) as amended, the launching appliance was tested under witnessing


of RINA as per Prototype Test Report dated on 29/10/2025.

NOTE

Materials as stated on the approved drawing are to be delivered with maker's product certificates.

Installation, on board testing, support to the deck structure shall be accepted by attending surveyor.





ATTACHMENT TO
CERTIFICATE No. MED238125WS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Bunan Xu
**** NOTICE: This is NOT an official certificate ****