ENGGN23/04/2014
 
Scheda
 Marine Equipment
Verifica della produzione mediante controllo dei prodotti
Module: G
Certification N. MED030413XP/001
Certificate date 4/23/14
Type Protezione antincendio
Directive 2012/32/EU
Product Inert gas systems components
Item Nº A.1/3.42
Model Generon IGS Inc. Membrane HPBM-7215 LP
Identification Nitrogen Generator: MM085003
Compressors: 349031/0996 and 349031/0997
Applicant GAS AND HEAT S.P.A.
Place of requester VIA TRE NOVEMBRE 8  %  57123 LIVORNO (LI)  % ITALY
Tel. N.,Fax, Email 050 316611, 050 988526, info@gasandheat.it
Standards Chapter II-2 of Solas '74 as amended
Surveyor Wieslaw Czajkowski
Notes Test carried out as per Sevice report at Gdansk Shipyard (PL) on 07-14/12/2013. Test Capacity: 900 m3/h, Working Pressure: 12.5 bar.
Head Office GDANSK



CERTIFICATE OF CONFORMITY (MODULE G)
CERTIFICATE Nr.  MED030413XP/001

THIS IS TO CERTIFY,
that the surveyor mentioned hereinafter did undertake the relevant unit verification for the product identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 96/98/EC, and subsequent Amendments.
MED Item Nº A.1/3.42
Description Inert gas systems components
Model Generon IGS Inc. Membrane HPBM-7215 LP
Identification Nitrogen Generator: MM085003
Compressors: 349031/0996 and 349031/0997
Applicant GAS AND HEAT S.P.A.
VIA TRE NOVEMBRE 8
57123 LIVORNO (LI)
ITALY
Testing standards Chapter II-2 of Solas '74 as amended
    
Issued at Gdansk 
on April 23, 2014

This Certificate consists of this sheet plus an attachment
On the basis of conditions stated in Article 11 of the Directive, this Certificate allows the Manufacturer to affix the following symbol to the equipment (lot of products) identified in the above box
0474 /14
 

________________________________________
RINA Services S.p.A. - Adam Konrad Lobodzinski
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****
ATTACHMENT TO
CERTIFICATE Nr. MED030413XP/001
Place of unit verification
Test carried out as per Sevice Report Program at Gdansk Shipyard (PL) on 07-14/12/2013. Test Capacity: 900 m3/h, Working Pressure: 12.5 bar.,,

Verified components of the equipment (with serial number)
Nitrogen Generator: MM085003
Compressors: 349031/0996 and 349031/0997
Technical documentation
Approved drawing: PPVT 4783 dated 26/11/2008,
Piping Diagram approved drawing: PPVT 4315 dated 29/10/2008
System diagram: E-0101
Test Certificate: 2008/XL/01-496 dated 11/12/2008
Statement 2011XL01-544A dated 29/11/2011  

Limitation on the acceptance or use of the product
-
____________________________
General condition of approval
a) This certificate will not be valid if the manufacturer or user makes any modification to the equipment, which has not been notified to, and agreed with RINA

___________________________________
RINA Services S.p.A. - Adam Konrad Lobodzinski
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****