MED093122CS!003ENGD- -  -  N- FRP W 010 -N- S- S- -14/03/2022- Marine Equipment- - SN- S- - N-  - 162,855B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED093122CS/003- N-Mar 13, 2027162855
 
Form
  Marine Equipment(TO)
Certification N. MED093122CS/003 - (ENG)
Certificate date 14/03/2022
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
FRP W 010
Applicant SOMEC S.P.A.
Place of requester VIA PALÙ 30  %  31020 San Vendemiano (TV)  % ITALY
Tel. N.,Fax, Email 0438471904, 0438471800, info@somecgroup.com
Directive (EU) 2021/1158
Standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 25/2/2022
Expire date 13/03/2027
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED093122CS/003

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2021/1158.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type FRP W 010
Applicant SOMEC S.P.A.
VIA PALÙ 30,31020 San Vendemiano (TV),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
March 14, 2022
March 13, 2027
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED093122CS/003
Page 1 of 3





Product description

Window composed of three or more panes having, each, maximum clear size of 1350 mm in width and 2570 mm in height. The glass compound, moving from the exposed side, is composed of pane type CONTRAFLAM A60 (manufacturer Vetrotech) having total thickness of 27 mm and composed of two glass having, each thickness of 5 mm, two glass 4 mm thick each and, in between, three layers of intumescing gel 3 mm thick each, a void space, 10 mm thick, and two toughened panes with or without deposited metallic oxides, 6 mm thick each (manufacturer Vetrotech) and, in between, a “SENTRY GLAS” layer having thickness of 1.52 mm (manufacturer Dupont). The central mullions are composed, moving from the side exposed to the fire, of a square steel pipe having dimensions of 100x100 mm and thickness of 5 mm welded to a steel plate, 5 mm thick and having width of 80 mm; the plate is welded to a steel profile having thickness of 20 mm fixed to a steel plate, 6 mm thick and having width of 100 mm, by means of M6 steel screws. The frame is composed of a steel profile having thickness of 20 mm welded to the bulkhead and fixed, by means of M6 stainless steel screws, to a stainless steel plate, 6 mm thick and having width of 60 mm. A layer of product named MICROBIFIRE, 15 mm thick and having density of 300 kg/m3, is fitted, on the side exposed to the fire, around the frame and the mullions, and is enclosed between the same and a steel sheet, having thickness of 1.2 mm, fixed by means of screws. Between the glass faces, the frame and the glass retaining frames, gaskets of PAPERSEAL ECO type, are fitted. Between the glass edges and the frame, on lower side, spacers of calcium silicate having dimensions of 25x15x15 mm, are fitted. The glass panes are sealed by means of silicone type PENSIL 300.












 



ATTACHMENT TO
CERTIFICATE Nr. MED093122CS/003
Page 2 of 3


Field of application

Fire resistant A-60 window with fire hazard in the inner side of the application and on side fitted with the pane having thickness of 27 mm. Hose stream resistant.
Reference documents

SOMEC MARINE drawing No. SDM-04-00 dated 27 December 2011 approved on 19 March 2012 with endorsement No. LABS-651.

Tests carried out

Tests as per RINA Test Laboratory Report No. 2012CS01712/4 issued on 19 March 2012 according to IMO Res. A. 754(18) Appendix A.I.




ATTACHMENT TO
CERTIFICATE No. MED093122CS/003
Pages 3 of 3
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****