FAB156523XP!001ENG
-
- -
N
-
Maximum weight 15 tons
-
N
-
S
-
S
-
-
20/11/2023
-
Fabbricanti Approvati
-
-
N
N
-
N
-
-
S
- -
152,066
B
Fabbricanti Approvati
Numero Pratica,NumDich,Norma,Schema,Richiesta,Validità
-
FAB156523XP/001
-
N
-
Nov 24, 2028
152066
Print Page
Form
Fabbricanti Approvati
(
TO
)
Certification N.
FAB156523XP/001
- (
ENG
)
Certificate date
20/11/2023
Type
Approvazione di fabbricanti di materiali
Product
Carbon, Carbon - Manganese and Alloyed Steel Forgings
Model or Denomin.
Items
Maximum weight 15 tons
Applicant
HSW - KUZNIA STALOWA WOLA SP. Z O.O.
View Certificate
Place of requester
UL. KWIATKOWSKIEGO 1 % 37-450 Stalowa Wola % POLAND
Tel. N.,Fax, Email
+48 15 843 54 14, +48 15 843 54 19, kmh@hsw.pl
Standards
RINA Rules for the approval of manufacturers of materials
Reference Documents
RINA Rules
Expire date
24/11/2028
Responsible Office
RINA Poland Marine
Codice scelto:
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
Lingua certificato:
ENG
Sotto modulo:
Vuoto
Fase:
Querysave
Firma:
S
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB156523XP/001
This is to certify
that the manufacture of the product identified below is in compliance with the applicable requirements of the RINA Rules for the Approval of Manufacturers of Materials.
Description
Carbon, Carbon - Manganese and Alloyed Steel Forgings
Type
Maximum weight 15 tons
Reference standards
RINA Rules for the approval of manufacturers of materials
Reference documents
RINA Rules
.
This Certificate is valid until
November 24, 2028
_________________________________
RINA Services S.p.A.
Gabriel Fijalkowski
This certificate consists of this page and 1 enclosure
**** NOTICE: This is NOT an official certificate ****
CERTIFICATE OF APPROVAL OF MANUFACTURERS OF MATERIALS
No.
FAB156523XP/001
Enclosure - Page 1 of 1
Maximum weight 15 tons
APPROVAL CONDITIONS
Manufacture of bars and forgings - thermal and mechanical treatment of metallurgical products.
Forging process
: open die forgings
Heat Treatment
: normalizing, normalizing and tempering, quenching and tempering
Suppliers
: material manufacturers recognized by the Classification Society
Survey conditions
: all forgings to be used for construction of ships classed with RINA shall meet the requirements of the RINA Rules and shall be tested accordingly.
General conditions for the approval
-The approval is granted on condition that the RINA Rules for the approval, manufacture, testing and certification of materials are complied with in all respects.
-RINA is to be notified of any change of materials, manufacturing process, quality control routines that may affect the validity of this certificate.
RINA Poland Marine
November 20, 2023
**** NOTICE: This is NOT an official certificate ****