MED237424CS!001ENGD- -  -  N- FLEXIGEL D060 -N- S- S- -27/05/2024- Marine Equipment- - SN- S- - N-  - 379,415B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED237424CS/001- N-May 26, 2029379415
 
Form
  Marine Equipment(TO)
Certification N. MED237424CS/001 - (ENG)
Certificate date 27/05/2024
Type Protezione antincendio
Product Sottofondo di copertura del ponte di coperta
Item Nº MED/3.1
USCG Category N° 164.106

Model
Items/Sizes
FLEXIGEL D060
Applicant API SPA
Place of requester Largo Guido Donegani 2  %  20121 Milano (MI)  % ITALY
Tel. N.,Fax, Email ---, ---, ---
Directive (EU) 2023/1667
Standard IMO Res. MSC.307(88)-(2010 FTP Code)
Reference Documents Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Request 10/04/2024
Validity 26/05/2029
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED237424CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2023/1667.
MED Item Nº MED/3.1
USCG Category Nº 164.106
Description Primary decks covering
Type FLEXIGEL D060
Applicant API SPA
Largo Guido Donegani 2,20121 Milano (MI),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code)
Reference standards Chap. II-2 and X of SOLAS 74 Convention, as amended, RINA Rules for the certification of Marine Equipment
Issued in Genoa on
This Certificate is valid until
May 27, 2024
May 26, 2029
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED237424CS/001
Page 1 of 2

Product description



Primary deck covering, composed of two components:
1st basic component: mixture of inorganic fillers and dispersed pigments in hydroxylated polyols and plasticisers;
2nd hardener component: mixtures of polymers isocyanates

  • Mass per area (kg/m2): 9
  • Thickness (mm): 15 ± 0,3

The material may also be produced by:
· API SpA, Regione San Marco 7 - 07041 Alghero - SS - ITALY.
· Stonhard, 7 Esterbrook Lane - Cherry Hill - NJ 08003 - USA.
· Stonhard, 1000 E. Park Ave. - Maple Shade - NJ 08052 - USA.


Field of application

As primary deck covering.

Tests carried out
Tests as per RINA Test Laboratory reports No. 2014CS013273/1 dated 18 December 2014 and No. 2014CS013273/2 dated 16 December 2014 issued according to:
  • IMO 2010 FTP Code Annex 1 Part 5
  • IMO 2010 FTP Code Annex 1 Part 2




ATTACHMENT TO
CERTIFICATE No. MED237424CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****