MED519525CS!001ENG- -  -  N- SHAPED METAL CEILING -N- S- S- -26/01/2026- Marine Equipment- - SN- S- - N-  - 254,401B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED519525CS/001- N-Jan 25, 2031254401
 
Form
  Marine Equipment(TO)
Certification N. MED519525CS/001 - (ENG)
Certificate date 26/01/2026
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Item Nº MED/3.11b
USCG Category N° 164.110

Model
Items/Sizes
SHAPED METAL CEILING
Applicant DE WAVE S.R.L.
Place of requester Via De Marini 60  %  16149 Genova (GE)  % ITALY
Tel. N.,Fax, Email davide.loria@dewavegroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents SOLAS 74 Reg. II-2/3.4,SOLAS 74 Reg. II-2/9,IMO MSC/Circ. 1120,IMO MSC.1/Circ. 1581
Request 14/11/2025
Validity 25/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED519525CS/001

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11b
USCG Category Nº 164.110
Description 'A' and 'B' Class divisions fire integrity: (b) 'B' Class divisions
Type SHAPED METAL CEILING
Applicant DE WAVE S.R.L.
Via De Marini 60,16149 Genova (GE),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards SOLAS 74 Reg. II-2/3.4; IMO Circ. MSC.1 1120; SOLAS 74 Reg. II-2/9; IMO Circ. MSC.1 1581
Issued in Genoa on
This Certificate is valid until
January 26, 2026
January 25, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED519525CS/001
Page 1 of 2

Product description

Ceiling consists of a single panel, installed at a minimum distance of 400 mm from the deck above, and is composed, starting from the fire-exposed side, of: a shaped carbon steel sheet, in accordance with the drawing reported in the following test report, with maximum dimensions of 1520 × 1220 mm and a thickness of 0.9 mm; and two layers of Rockwool mineral wool, SeaROX SL970 type, with a density of 110 kg/m³ and a thickness of 20 mm each. The mineral wool layers are bonded to each other and to the carbon steel sheet using 70 g/m² of Caseine & Colle type First adhesive. The ceiling includes the following stiffeners bonded to the carbon steel sheet with 70 g/m² of Noxorsokem type Powerflex adhesive: two longitudinal omega-shaped carbon steel stiffeners with dimensions of 22 × 20 × 30 × 20 × 22 mm and a thickness of 1.5 mm, positioned at a variable pitch between 285 mm and 496 mm; and one transverse omega-shaped carbon steel stiffener with dimensions of 22 × 20 × 30 × 20 × 22 mm and a thickness of 1.5 mm, positioned at a distance of 480 mm.
The ceiling sheet metal is fixed to the head of the bulkhead by means of an "L" shaped profile, using self-tapping screws with a DN of 4.2 mm, pitched at 225 mm intervals.

The ceiling may also be produced by:
- De Wave Polska, ul. Spoldzielcza 4, 87-600 Lipno, Poland; Marek Malinowski m.malinowski@dewavepolska.pl

Fields of application
Fire resistant B-15 Class ceiling.
The certificate item is not in compliance with the requirement of Fire Test Procedure Code Part 3 regarding the minimum dimension of the ceiling and this characteristic must be taken into account.

Reference documents
DE WAVE drawing No. C9999/AC/1744 Rev.0 dated 17/11/2025 enclosed on Test Report No.2025CS015195 dated 26/01/2026.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2025CS015195 issued on 26/01/2026 according to IMO 2010 FTP CODE Part 3 Annex 1.




ATTACHMENT TO
CERTIFICATE No. MED519525CS/001
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****