MED511525CS!039ENG- -  -  N- 325A-0_2_#5500_01 -N- S- S- -08/01/2026- Marine Equipment- - SN- S- - N-  - 2,372,775B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED511525CS/039- N-Jan 7, 20312372775
 
Form
  Marine Equipment(TO)
Certification N. MED511525CS/039 - (ENG)
Certificate date 08/01/2026
Type Protezione antincendio
Product 'A' & 'B' class fire proof windows and side scuttles
Item Nº MED/3.25

Model or Denomin.
Items
325A-0_2_#5500_01
Applicant MARINE INTERIORS S.P.A.
Place of requester VIA GENOVA 1  %  34121 Trieste (TS)  % ITALY
Tel. N.,Fax, Email ---, ---, marco.varriale@fincantieri.it
Directive (EU) 2025/1533
Standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference Documents IMO Circ. MSC 1120,IMO Res.MSC.5(48)-(IGC Code) 3,SOLAS 74 Reg. II-2/9
Expire date 07/01/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED511525CS/039

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.25
Description 'A' & 'B' class fire proof windows and side scuttles
Type 325A-0_2_#5500_01
Applicant MARINE INTERIORS S.P.A.
VIA GENOVA 1,34121 Trieste (TS),ITALY
Testing standards IMO Res. MSC.307(88)-(2010 FTP  Code), as amended.
Reference standards IMO Circ. MSC 1120; IMO Res.MSC.5(48)-(IGC Code) 3; SOLAS 74 Reg. II-2/9
Issued in Genoa on
This Certificate is valid until
January 8, 2026
January 7, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED511525CS/039
Page 1 of 2

Product description

Window, with one central mullion, having maximum total overall clear size of 1420 x 1420 mm (WxH); each window has maximum clear light of 675x1420 mm. The glass compound is composed of a toughened Float Chiaro glass (manufacturer Vetrotech) having thickness of 10 mm, a PVB layer, 1.52 mm thick and a glass type PYROSWISS N.G. (manufacturer Vetrotech) having thickness of 10 mm. The central mullion (supplier Metalsigma) is composed, moving from the side not exposed to the fire, of a rectangular steel pipe having dimensions of 70x50 mm and thickness of 5 mm welded to a steel plate, 20 mm thick, fixed to a stainless steel glass retaining frame, 6 mm thick and having width of 70 mm, by means of M6 screws. The frame (manufacturer Metalsigma) is composed of a steel profile having depth of 118 mm welded to the bulkhead and fixed, by means of M6 screws, to a stainless steel glass retaining frame, 6 mm thick and having width of 40 mm. Between the glass faces, the frame, the glass retaining frames and the central mullion, gaskets of KERAFIX FLEXLIT type, having thickness of 5 mm, are fitted. Between the glass edges, the frame the glass retaining frames and the central mullion, spacers of calcium silicate having thickness of 12 mm, are fitted.
Field of application
Fire resistant A-0 window with fire hazard in the inner side of the application and on side fitted with the toughened Float Chiaro glass.
Reference documents
METALSIGMS TUNESI drawing No. 2962 T-8-A0 dated 4 March 2013 approved on 19 April 2013 with endorsement No. LABS-771.
Tests carried out
Tests as per RINA Test Laboratory Report No. 2013CS01299/1 issued on 2 May 2013 according to IMO Res. A. 754(18) Appendix A.I.




ATTACHMENT TO
CERTIFICATE No. MED511525CS/039
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****