| Single leaf hinged door whose maximum clear opening size is 1400 mm wide and 2400 mm high. The door leaf, having maximum width of 1447 mm and maximum height of 2417 mm, is composed of two carbon steel sheets, 1 mm thick each and, in between, one layer of mineral wool (certified non combustible in conformity to the IMO FTP Code), 60 mm thick and having density of 115 kg/m3. The mineral wool is glued to the steel sheets by means of adhesive type Henkel Macroplast UK8103/UK5400. The leaf is fitted, on the perimeter, with C shaped carbon steel profiles, 1 mm thick and having dimensions of 64x15 mm. Inside the leaf, in the central part, No. 2 longitudinal C shaped carbon steel stiffeners, 1 mm thick and having dimensions of 60x20 mm, are welded to the steel sheets on the upper and lower part of the leaf. The leaf may be fitted with a window having clear light of 530 mm (W) and 730 mm (H). The glass compound, having total thickness of 51 mm is composed of a toughened glass 12 mm thick, a void space 12 mm deep and a glass named Contraflam Marine A60 composed of four glasses 4 and 5 mm thick each and, in between, three layers of thermoespanding gel (manufacturer Vetrotech Saint Gobain). The door may be fitted with a self closing hose port having dimensions of 188 (W) x 160 (H) mm. The frame and the counterframe, insulated with the same mineral wool having thickness of 70 mm, are composed of two S shaped steel profiles having thickness of 3 mm bolted together and to the bulkhead by means of M10 bolts fitted with pitch ranging from 300 up to 750 mm. Field of application Fire resistant A-30 Class single leaf hinged door.
In case of doors in compliance to the "Agreement between the European Community and the United States of America", the present certificate is valid at the following conditions:
- doors without windows or with total window area no more than 645 cm2 in each door leaf;
- maximum door size tested;
- door used with a fire tested frame design.
The surfaces of this division may be fitted with products having low flame spread characteristics, installed as described in the relevant type approval certificates and satisfying the requirements of SOLAS 74 Reg. II-2 as applicable.Reference documents Naval Suppliers drawing No. FT_PA6S_110627_R00 dated 27 June 2011 approved on 20 July 2011 with endorsement No. LABS-575.Tests carried out Tests as per RINA Test Laboratory Report No. 2011CS012201/2 issued on 21 July 2011 according to IMO Res. A. 754(18). |