MED381326CS!006ENGD- -  -  N- Fire detector bases:,MD9900 BC,MD9900 BCI,MD9900 BS,MD9900 BSI,MD9900 BBZ,MD9900 BBZI,MD9900 BSZ,MD9900 BSZI,MD9900-BC-PT,MD9900-BCI-PT,MD9900-BBZ-PT,MD9900-BBZI-PT,MD9900-BS-PT,MD9900-BSI-PT,MD9900-BSZ-PT,MD9900-BSZI-PT,MD9910-LP -N- S- S- -21/06/2026- Marine Equipment- - SN- S- - N-  - 840,487B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED381326CS/006- N-Jun 21, 2031840487
 
Form
  Marine Equipment(TO)
Certification N. MED381326CS/006 - (ENG)
Certificate date 21/06/2026
Type Protezione antincendio
Product Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (g) Short circuit isolators
Item Nº MED/3.51g

Model
Items/Sizes
Fire detector bases:,MD9900 BC,MD9900 BCI,MD9900 BS,MD9900 BSI,MD9900 BBZ,MD9900 BBZI,MD9900 BSZ,MD9900 BSZI,MD9900-BC-PT,MD9900-BCI-PT,MD9900-BBZ-PT,MD9900-BBZI-PT,MD9900-BS-PT,MD9900-BSI-PT,MD9900-BSZ-PT,MD9900-BSZI-PT,MD9910-LP
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
Place of requester VIA GRETI DEL VARA 9  %  19020 Follo (SP)  % ITALY
Tel. N.,Fax, Email 0187 599101, 0187 558983, d.dido@microdatasrl.it
Directive (EU) 2025/1533
Standard EN 54-17 (2005) including AC(2007),IEC 60092-504:2016,IEC 60533: (2015)
Reference Documents Solas 74 Reg. II-2 /7 ,# Solas 74 Reg. X/3,# IMO Res. MSC.36(63)-(1994 HSC Code)7,# IMO Res.MSC.97(73)-(2000 HSC Code) 7,# IMO Res.MSC.98(73)-(FSS Code) 9,# IMO MSC.1/Circ.1242,# RINA Rules for the certification of Marine Equipment.
Validity 21/06/2031
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Chiara Boscolo S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED381326CS/006

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.51g
Description Fixed fire detection and fire alarm systems components for control stations, service spaces, accommodation spaces, cabin balconies, machinery spaces and unattended machinery spaces: (g) Short circuit isolators
Type Fire detector bases:
Applicant MICRODATA DUE - SOCIETA' A RESPONSABILITA' LIMITATA
VIA GRETI DEL VARA 9,19020 Follo (SP),ITALY
Testing standards EN 54-17 (2005) including AC(2007),IEC 60092-504:2016,IEC 60533: (2015)
Reference standards Solas 74 Reg. II-2 /7 ; # Solas 74 Reg. X/3; # IMO Res. MSC.36(63)-(1994 HSC Code)7; # IMO Res.MSC.97(73)-(2000 HSC Code) 7; # IMO Res.MSC.98(73)-(FSS Code) 9; # IMO MSC.1/Circ.1242; # RINA Rules for the certification of Marine Equipment.
Issued in Genoa on
This Certificate is valid until
June 21, 2026
June 21, 2031
This Certificate consists of this sheet plus an attachment

________________________________________
Luigi Benedetti
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED381326CS/006
Page 1 of 4
Fire detector bases
The following detector bases may be used in connection with MD9900 and MD9901 detectors:

Models MD9900 BC or MD9900-BC-PT and MD9900 BCI or MD9900-BCI-PT detector bases
(IP 32 in connection with the MD9900 detectors) for false ceiling installation;
Models MD9900-BCI or MD9900-BCI-PT in addition contain a short-circuit isolator
Models MD9900-BC-PT and MD9900-BCI-PT are suitable for connection to PTS Satellite

MD 9900 BS or MD9900-BS-PT and MD 9900-BSI or MD9900-BSI-PT detector bases:
(IP65 in connection with the MD9900 detectors)
Models MD9900-BSI or MD9900-BSI-PT in addition contain a short-circuit isolator
Models MD9900-BS-PT and MD9900-BSI-PT are suitable for connection to PTS Satellite

Reference documents:
Microdata Due ST21405 Rev. D ELET/44924 Technical specification
Microdata Due D24729 Rev. G ELET/44925 Data sheet
Microdata Due D24730 Rev. G ELET/44926 Data sheet
Microdata Due D36618 Rev.C ELET/44927 Functional Test Procedure

Test reports:
Isistuto Giordano Laboratory:
No. 213254 (RINA Id. ELET/44817); Reference Standard: CEI EN 60529:1997 Enclosure Protection; IP 32 with detector bases MD9900-BC and MD9900BCI; IP 65 with detector bases MD9900-BS and MD9900-BSI; Date: 06/2006

TesLab Laboratory:
No. 214123E (RINA Id. ELET/44815); Reference Standard: EN 50130-4:2011+A1:2014; Date: 10/05/2021

Microdata Due
No. 196 (RINA Id. ELET/44937) annex to IS-24743 Rev. 0 (22/02/2005) Functional Test (witnessed by RINA)
No. IS34434 (RINA Id. ELET/44938) Functional Test FDS - PTS (witnessed by RINA); Date: 16/05/2014
No. D36618 (RINA Id. ELET/44939): MD99xx short circuit isolator functional test procedure; Reference standard: EN 54-17:2005 - Part 17 (witnessed by RINA); Date: 13/07/2016


Fire detector bases with buzzer
The following detector bases may be used in conjunction with MD9900 and MD9901 detectors:

MD9900-BBZ and MD9900-BBZI or MD9900-BBZ-PT and MD9900-BBZI-PT fire detector bases
(IP 32 in connection with the MD9900 detector) include a Buzzer suitable for warning a fire alarm in accommodation spaces.
Models MD9900-BBZI or MD9900-BBZI-PT in addition contain a short circuit isolator
Models MD9900-BBZ-PT and MD9900-BBZI-PT are suitable for connection to PTS Satellite

MD9900-BSZ or MD9900-BSZ-PT and MD9900-BSZI or MD9900-BSZI -PT fire detector bases
(IP 65 in connection with the MD9900 detector) include a Buzzer suitable for warning a fire alarm in a crew spaces.
Models MD9900-BSZI or MD9900-BSZI -PT in addition contain a short circuit isolator
Models MD9900-BSZ-PT and MD9900-BSZI -PT are suitable for connection to PTS Satellite




ATTACHMENT TO
CERTIFICATE No. MED381326CS/008
Page 3 of 4



Reference documents:
Microdata Due ELET/44929 Data sheet n. D27897 Rev. G ;
Microdata Due ELET/44930 Data sheet n. D29020 Rev. D
Microdata Due ELET/44928 Report n. 474 annex to IS -28961 Functional tests
Microdata Due ELET/44927 Functional Test Procedure n. D36618 Rev.0

Test reports:
Isistuto Giordano Laboratory:
No. 213254 (RINA Id. ELET/44817); Reference Standard: CEI EN 60529:1997 Enclosure Protection; IP 32 with detector bases MD9900-BC and MD9900BCI; IP 65 with detector bases MD9900-BS and MD9900-BSI; Date: 06/2006

TesLab Laboratory:
No. 08C189F-3 (RINA Id. ELET/44941) Environmental Test (RINA Rules 2008; EN 54-2; EN 54-3; EN 60945); Date: 23/02/2009.
No. 17B302E-a (RINA Id. ELET/44816); Reference Standard: EN 60092-504 - Radiated Emission and Immunity to Radiated Radio-Frequency Electromagnetic Field; MD9900-BBZI; Date: 12/01/2018
No. 214123E (RINA Id. ELET/44815); Reference Standard: EN 50130-4:2011+A1:2014; Date: 10/05/2021

Microdata Due

No. IS34434 (RINA Id. ELET/44938) Functional Test FDS - PTS (witnessed by RINA); Date: 16/05/2014
No. D36618 (RINA Id. ELET/44939): MD99xx short circuit isolator functional test procedure; Reference standard: EN 54-17:2005 - Part 17 (witnessed by RINA); Date: 13/07/2016

Fire detector bases MD9910-LP:
MD9910-LP is a Detector Base suitable to connect the MD9910 Smoke and Heat Detector to the Fire Detection Loop.
The Base is composed of a plastic enclosure made of polycarbonate in which the electronic board AS-29686 is mounted, which includes the Short Circuit Isolator and the connectors for interfacing the MD9910 detector to the loop.

Reference documents
Microdata Due ELET/44931 Technical Specifications n. ST39940 Rev. B
Microdata Due ELET/44932 Datasheet n. D39924 Rev. D
Microdata Due ELET/44927 Functional Test Procedure n. D36618 Rev.C
Microdata Due ELET/44933 Drawing CM-29685-40007
Microdata Due ELET/44934 Drawing CM-29685-40010

Test reports:
TesLab Test Report:
No. 19A284F (RINA Id. ELET/44942): MD9910-LP + AS-29769; Reference Standard: EN 54-17:2005; Date: 28/12/2019
No. 19A285F (RINA Id. ELET/44943): MD9910-LP + AS-29769; Reference Standard: IEC 60092-504:2016; Date: 19/12/2019




ATTACHMENT TO
CERTIFICATE No. MED381326CS/006
Pages 4 of 4
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Luigi Benedetti
**** NOTICE: This is NOT an official certificate ****