MED493025CS!005ENGB- -  -  N- PROMAGUARD ® A120+ Unrestricted Bulkhead System -N- S- S- -25/11/2025- Marine Equipment- - SN- S- - N-  - 704,840B2bisMarine EquipmentNumero Pratica,Direttiva,Norma,Schema,Richiesta,Validità,EmailR- MED493025CS/005- N-Nov 24, 2030704840
 
Form
  Marine Equipment(TO)
MED493025CS/005
Certification N. MED493025CS/005 - (ENG)
Certificate date 25/11/2025
Type Protezione antincendio
Product 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Item Nº MED/3.11a
USCG Category N° 164.107

Model or Denomin.
Items/Sizes
PROMAGUARD ®  A120+ Unrestricted Bulkhead System
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
Place of requester BORMSTRAAT 24  %  2830 Tisselt  % BELGIUM
Tel. N.,Fax, Email +32 15 71 82 70, ---, invoices.be@etexgroup.com
Directive (EU) 2025/1533
Standard IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Reference Documents SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616,IMO Circ. MSC.1 1621
Request 27/10/2025
Validity date 24/11/2030
EC TYPE-EXAMINATION (MODULE B) ENG
Vuoto Querysave
Enrico Cabella S

EC TYPE EXAMINATION (MODULE B)
CERTIFICATE No. MED493025CS/005

This is to certify that RINA Services S.p.A. (Notified Body No. 0474) did undertake the relevant type approval procedures for the equipment identified below, which was found to be in compliance with the Fire Protection requirements of Marine Equipment Directive (MED) 2014/90/EU, including the requirements and testing standards of Regulation (EU) 2025/1533.
MED Item Nº MED/3.11a
USCG Category Nº 164.107
Description 'A' and 'B' Class divisions fire integrity: (a) 'A' Class divisions
Type PROMAGUARD ®  A120+ Unrestricted Bulkhead System
Applicant Promat Research and Technology Centre - PROMAT RESEARCH AND TECHNOLOGY CENTRE
BORMSTRAAT 24,2830 Tisselt,BELGIUM
Testing standards IMO Res. MSC.307(88)-(2010 FTP Code), as amended - IMO MSC.1/Circ. 1435
Reference standards SOLAS 74 Reg. II-2/3.2, SOLAS 74 Reg. II-2/9, IMO MSC/Circ.1120, IMO MSC.1/Circ.1434, IMO MSC.1/Circ.1616; IMO Circ. MSC.1 1621
Issued in Genoa on
This Certificate is valid until
November 25, 2025
November 24, 2030
This Certificate consists of this sheet plus an attachment

________________________________________
Enrico Cabella
RINA Services S.p.A.
**** NOTICE: This is NOT an official certificate ****

ATTACHMENT TO
CERTIFICATE No.  MED493025CS/005
Page 1 of 2

Product description

Steel bulkhead insulated, on the stiffened face, by means of 2 layers of 10 mm thick PROMAGUARD® panels maximum size 1200mm x 600mm. The PROMAGUARD® panels are fixed to the bulkhead using 3mm in diameter and minimum 50mm long steel pins welded to the plate and held in position by steel friction grip washer. The welded pins are located in rows along the horizontal edges of the panels, maximum 50mm from the panel edges and at maximum 375mm centres. Pins are also located at a maximum of 50mm from the vertical panel joints along the same horizontal planes. The PROMAGUARD® panels are butt jointed together with the joints in the outer layer offset by at least 100mm from those of the first layer and a layer of PROMASEAL® Glue 100mm wide is applied between the first and second layesr of the insulation panels centred on all panel joints.
Field of application
Fire resistant A-60 Class Bulkhead.
Reference documents
EXOVA Warringtonfire Laboratory Report No. 357720 issued on 13 January 2016 according to IMO 2010 FTP Code Part. 3.
Tests carried out
Test as per EXOVA Warringtonfire Laboratory Report No. 357720 issued on 13 January 2016 according to IMO 2010 FTP Code Part. 3
Additional information
The systems may also be used, under the judgement of interested parties, as an A-60 insulation material for applications on steel pipes as specified in IMO MSC.1/Circular 1369 – Interpretation 12 of SOLAS Reg. II-2/21.4

Based on a customer request the test was extended up to 180 minutes as stated in EXOVA Warringtonfire Laboratory Report No. 357720 issued on 13 January 2016 according to IMO 2010 FTP Code Part 3 and for the period of 167 minutes, the requirements related to integrity and insulation have been satisfied.




ATTACHMENT TO
CERTIFICATE No. MED493025CS/005
Pages 2 of 2
The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer's Declaration of Conformity issued when the production control phase module (D, E or F) of Annex II of the Directive is fully complied with a written inspection agreement with a Notified Body
XXXX/YY
"WHEELMARK FORMAT"

XXXX
Notified Body number undertaking surveillance module
YY
Last two digits of year mark affixed
     
______________________________________________
General conditions for the approval
a) The initial conditions verified by RINA at the time of the approval are to be maintained
b) Any changes to the initial conditions are to be promptly communicated to RINA, which reserves the right to repeat the relevant assessment
c) This certificate will no be valid if the manufacturer makes any changes or modifications to the approved equipment, which have not been notified to, and agreed with RINA
d) RINA personnel are to be allowed to witness during the performances of activities, upon their request
e) The activities are to be carried out in compliance with the RINA Rules and/or other applicable Rules

f) Should the specified regulations or standards be amended during the validity of this certificate, the product is to be reapproved prior to it being placed on board vessels to which the amended regulations or standards apply. 


__________________________________________
Enrico Cabella
**** NOTICE: This is NOT an official certificate ****